TSB

screen printing => Ink and Chemicals => Topic started by: Mitchel on September 19, 2018, 10:22:23 AM

Title: Translucent gray
Post by: Mitchel on September 19, 2018, 10:22:23 AM
Hi All

I have a costomer who wants print a translucent gray on this t-shirt , he says, that the color of the t-shiret must appear a little.

Any of you have already made this?

In my head am not sure we can do that? but not sure. :-\

Thanks
Michel,
Title: Re: Translucent gray
Post by: Mitchel on September 19, 2018, 10:24:02 AM
picture is only for view, is not this logo we want print.
Title: Re: Translucent gray
Post by: Prince Art on September 19, 2018, 10:33:38 AM
I haven't had the need to do it, but I'd test print a clear base or curable reducer. If that wasn't dark enough, I'd tint the base slightly with black or dark grey. (This assumes you're printing on light grey shirts, as in the photo.) The other step to let the shirt color show through is print a single pass on a high mesh. Hard duro squeegee can help, too.
Title: Re: Translucent gray
Post by: im_mcguire on September 19, 2018, 10:43:34 AM
I haven't had the need to do it, but I'd test print a clear base or curable reducer. If that wasn't dark enough, I'd tint the base slightly with black or dark grey. (This assumes you're printing on light grey shirts, as in the photo.) The other step to let the shirt color show through is print a single pass on a high mesh. Hard duro squeegee can help, too.
Yes. We have done this by printing chino base or softee base straight onto the shirt.
Title: Re: Translucent gray
Post by: Frog on September 19, 2018, 10:52:31 AM
This is also a way I use up (albeit small amounts) of my mis-match/leftover ink blend. Unfortunately, my shop has always had a bucket of this grayish mess.  This, added to a lot of softhand base is great for these "tone on tone" prints.
Title: Re: Translucent gray
Post by: Sbrem on September 19, 2018, 11:37:34 AM
Yes, clear base, and I'd add a small amount of black to it as I don't think clear by itself would look quite like that picture, but this is why we test, yes?

Steve
Title: Re: Translucent gray
Post by: Mitchel on September 19, 2018, 02:37:59 PM
thank you very much for your advises :D
as you say, I'm going to try the clear base with some black to have this effect.

Michel,
GMA Serigraphie
Title: Re: Translucent gray
Post by: DannyGruninger on September 19, 2018, 03:35:54 PM
Waterbase is the only way to go for this..... In my experience with chino base, reducer, etc after one wash it fades and becomes super fibulated. Matsui 301 clear base plus .5% dark blue pigment for that look is what we would do here

Title: Re: Translucent gray
Post by: Colin on September 19, 2018, 06:27:09 PM
For long term washability - Danny is 100% correct.

I used to do that printing weekly.  I used Rutland Primer clear with .5% C3 black concentrate.  It would fibrelate after 3-5 washes and look faded.

Waterbase HSA clear will give you better long term fibre matte with a super soft hand.
Title: Re: Translucent gray
Post by: Mitchel on September 20, 2018, 03:55:31 PM

ok! I never print water base ??? Colin that the way i'll go whit the Rutland, thank to advime me for the fibrelate,
question : You say primer .. it is the same, prime or clear base ?

Thank
Michel,
Title: Re: Translucent gray
Post by: Colin on September 20, 2018, 11:09:36 PM
The full product name is Ultra Soft Primer Clear.

It has better long term fiber matte qualities than the other ultrasoft inks out there.