TSB
screen printing => General Screen Printing => Topic started by: Maxie on April 16, 2018, 09:37:23 AM
-
We have always got a reasonable result printing fleece on a automatic using 110 base and 150 top colors.
I'm trying to improve the result, get a thinner print and tried 150 base and 150 for the top colors.
Result is not great, the base is not smooth or white enough.
Questions are?
Can I print fleece with a 150 base?
What squeegee is recommended?
Can I use the roller on fleece?
-
is it plastisol? If so, 150 should be fine!
Using the roller is also fine, just make sure your adhesive is working correctly.
-
we use 150s mesh here. We will use the roller on stable fleece fabrics.
Some fleece is really spongy and does not do well with any kind of movement (slightly tacky ink will - potentiall - shift the garment a bit... it sucks). We do not use the roller on those just to eliminate the possibility of a misprint.
We will use 180s mesh for our top colors - maybe a 225s depending.
And as always - spray tack is your friend :D
-
Agreed. 150 should be fine. I like a 70/90/70 blade for poly bases and try to print with just enough pressure to clear in one stroke. I try to avoid double stroking fleece. Usually have to slow your stroke down considerably to start, but can speed things up pretty quickly as the ink gets moving which will help with brightness.
May need to lighten up pressure on roller as well if you’re getting too much pull as Colin mentioned but can try bumping your flash down for smoother prints.