« previous next »
Pages: [1]   Go Down

Author Topic: Bucket Handle saver  (Read 2378 times)

Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Bucket Handle saver
« on: August 31, 2011, 07:33:25 AM »
I hate it when I grab a bucket handle and it has ink on it. I started screwing a short screw into the square part of the bucket where the bail attaches to the bucket, don't screw it into the inside. This has been a time saver for me. See pic. http://i717.photobucket.com/albums/ww179/rmonks_photos/BucketHandlesaver.png
Logged

Offline whitewater

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1781
Re: Bucket Handle saver
« Reply #1 on: August 31, 2011, 08:37:21 AM »
good idea...did you spill your milk?
Logged

Offline terryei

  • !!!
  • Full Member
  • ***
  • Posts: 214
Re: Bucket Handle saver
« Reply #2 on: August 31, 2011, 09:09:42 AM »
rmonks, great idea.  I showed it to the printer, he said if I wanted to screw all the buckets, go ahead, otherwise he'll just continue to use gloves, and his sippy cup.
terry
Logged

Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Re: Bucket Handle saver
« Reply #3 on: August 31, 2011, 10:00:32 AM »
Quote from: whitewater on August 31, 2011, 08:37:21 AM
good idea...did you spill your milk?

No didn't spill the milk, that is an additive to reduce the viscosity.
Logged

Offline Northland

  • Hero Member
  • *****
  • Posts: 619
Re: Bucket Handle saver
« Reply #4 on: August 31, 2011, 03:50:43 PM »
Someone (Calibrated ??) used to recommend putting a thin wire across the top of the pail... as a wiping point. Keeps the sides cleaner.
Logged

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7795
Re: Bucket Handle saver
« Reply #5 on: August 31, 2011, 05:04:09 PM »
that is correct and it was a BBQ skewer
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13958
  • Docendo discimus
Re: Bucket Handle saver
« Reply #6 on: August 31, 2011, 05:53:12 PM »
From Calibrated back in June

Most people (myself included) have problems with keeping the ink from dripping all over the edges of the bucket. All you need are some metal BBQ skewers and then poke them through the side of the ink buckets (cut length to size) to use as a tool to scrape your ink knife instead of using the edge of the bucket. If you insert them into the bucket when the lid is ON the bucket, you will be sure to make it possible to keep the skewer when the lid is on and the buckets are stored on the shelf. A simple, yet effective trick!
Logged
That rug really tied the room together, did it not?

Offline Donnie

  • !!!
  • Hero Member
  • *****
  • Posts: 614
Re: Bucket Handle saver
« Reply #7 on: September 22, 2011, 10:48:11 PM »
I showed it to the printer, he said if I wanted to screw all the buckets


I'll let this one slide.... ;)
Logged
Pages: [1]   Go Up
« previous next »