Computers and Software > Separation Programs

Epson 3000 Service manual link included. Topic: Removing the cover

(1/5) > >>

Dottonedan:
I've tried on my own, and I've read other forums on the Epson, and have even downloaded the general Epson printer service manual but haven't found anything that specifically tells you how to remove the cover. You'd think I could find it on my own, but it's hidden somehow.


I'm thinking i need to soak the pads and maybe run some isopropyl thru the heads. Been sitting for a year or so.

Inkworks:
Mine sat in a hot attic for 2 years and fired up and printed fine after 2 clean cycles. I'd fire it up and see how it goes, the things are tanks.

Dottonedan:
Oh, I've fired it up. It's printing (or going thru the motions) but not printing ink. No nozzle check images. I've done about 8 auto cleans.  I might need to replace the ink cartridges also. Who knows. I just wanna get the cover off, so I can get inside and clean it. I can see a good bit of dust fuzz near heads.

rmonks:
https://archive.org/details/printermanual-epson-stylus-color-3000-service-manual

This has been the most helpful instructions I have found. Section 3.2 It is pretty easy after you do it one time

farmboygraphics:

--- Quote from: rmonks on December 07, 2014, 07:55:44 AM ---https://archive.org/details/printermanual-epson-stylus-color-3000-service-manual

This has been the most helpful instructions I have found. Section 3.2 It is pretty easy after you do it one time

--- End quote ---

Thank you for the link. I have 2 spare 3000's and have been wanting to go through them.

Navigation

[0] Message Index

[#] Next page