Author Topic: Pictures in Printwear  (Read 1294 times)

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1862
Pictures in Printwear
« on: May 27, 2015, 10:34:34 AM »
Great pictures Tony. I've been waiting to see what Joe was going to use. Beautiful stuff. As always.
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA


Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Pictures in Printwear
« Reply #1 on: May 27, 2015, 10:36:16 AM »
link?

Offline Rob Coleman

  • Sr. Member
  • ****
  • Posts: 359
Re: Pictures in Printwear
« Reply #2 on: May 27, 2015, 10:41:35 AM »
Could it be this?  Page 77 - http://read.uberflip.com/i/514977-june-15
Rob Coleman | Vice President
Textile Business Unit | Nazdar SourceOne | sourceone.nazdar.com
(800) 677-4657 ext. 3708 | Cell (678) 230-4463
rcoleman@nazdar.com

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1862
Re: Pictures in Printwear
« Reply #3 on: May 27, 2015, 12:07:49 PM »
Also an article on WB by Mr. Ray Smith right before Joe's I believe.
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5633
Re: Pictures in Printwear
« Reply #4 on: June 03, 2015, 10:46:43 AM »
Whos Ray Smith? ;) Both pretty good articles although I might have some slightly different spins on some of the content that I will keep to myself.
And yeah, Carly (Editor) went totally batshit crazy with the Art. Memory lane stuff there
Thanks Dave, sent you a P-Mail

Offline GaryG

  • !!!
  • Hero Member
  • *****
  • Posts: 750
Re: Pictures in Printwear
« Reply #5 on: June 03, 2015, 12:31:08 PM »
I remember seeing Ray when touring the Wilflex plant in '94. Come full circle.
He was so young, looked like he just came straight from Jr. High into the lab.
How time flies!

That was a neat issue of Printwear.
« Last Edit: June 03, 2015, 12:34:24 PM by GaryG »