Selling a bunch of stuff

[mimosatexas]

Getting rid of a lot of the stuff I've picked up over the years that I either don't or can't use in my current space

http://austin.craigslist.org/bfs/5981090695.html

[Inkworks]

Is that American clamshell a sliding table or auto take-off model? or just regular clamshell?

[mimosatexas]

Just a clamshell

[Sbrem]

That's our squeegee sharpener! American was and is good stuff, we run 2 Tex-Air dryers here...

Steve

[Bearded Lady]

Where in Texas are ya?

[mimosatexas]

I'm in Austin. You are too, right?

[mimosatexas]

Quick update and maybe this should have its own thread.  Just plugged in the Javelin and it isn't turning on.  Any idea what might be the issue, something that could have dislodged or come unplug during the move? Fuse bad?  Opened up the control panel and everything looks like its in place and should be working...

[screenxpress]

what is the footprint on the javelin?

[mimosatexas]

Between 10 and 11 feet I think

[mk162]

Quick update and maybe this should have its own thread.  Just plugged in the Javelin and it isn't turning on.  Any idea what might be the issue, something that could have dislodged or come unplug during the move? Fuse bad?  Opened up the control panel and everything looks like its in place and should be working...

Does the outlet you are plugging it into have power?  Just sayin.

I would go through and start tracing where power goes to.  I am not sure what kind of PLC those have, but if ti has lights are they on? I had a control panel come unhooked one time, the whole press looked dead, but it actually had power.

[Bearded Lady]

I'm in Austin. You are too, right?

I am in Austin!!  I'm downsizing and might want to grab that small drying rack.  I need to make sure it will work for me first.  I have to finish moving out of my current shop today and then am about to be out of town for a week.  How quickly are you wanting to get rid of it?

[spotcolorsupply]

Quick update and maybe this should have its own thread.  Just plugged in the Javelin and it isn't turning on.  Any idea what might be the issue, something that could have dislodged or come unplug during the move? Fuse bad?  Opened up the control panel and everything looks like its in place and should be working...

The safety cable needs to be hooked up or bypassed for the press to come on.

[screenxpress]

Between 10 and 11 feet I think

Sorry but my space won't accommodate it, dammit.  My max footprint is about 8 to 8.5

[mimosatexas]

No worries!

[mimosatexas]

I'm in Austin. You are too, right?

I am in Austin!!  I'm downsizing and might want to grab that small drying rack.  I need to make sure it will work for me first.  I have to finish moving out of my current shop today and then am about to be out of town for a week.  How quickly are you wanting to get rid of it?

Pretty much ASAP on everything.  I've only had one other text about it though so far.