General > M&R
97 Guantlet 2 acting up
(1/1)
cbjamel:
I think sensor but i have tried replacing front and rear does same thing. What am i missing.
Video of it.
https://goo.gl/photos/tCvSXuJdTsFV8u2C8
Thanks,
Shane
dirkdiggler:
Can you go under the machine and manually press the mac valve? Press it a bunch of times and see if it keeps doing that. It could be bad.
CGS:
Pneumatic issue -- Mac valve or stroke cylinder, since it looks like an air drive print head, is sticking, or has a nick / fold over on seal and is blowing by at times
cbjamel:
i will look and see. Thanks guys for the ideas.
Shane
Sent from my SAMSUNG-SM-G890A using Tapatalk
cbjamel:
OK did the press the button alot waont do it on the stroke or choppers. So i made head in front and no problem. So i will call next week to M & R and see what they think.
Shane
Navigation
[0] Message Index
Go to full version