« previous next »
Pages: 1 [2]   Go Down

Author Topic: Sprint 2000 Circulation Blower Overhaul  (Read 5153 times)

Online Evo

  • Hero Member
  • *****
  • Posts: 928
  • Anything is possible.
Re: Sprint 2000 Circulation Blower Overhaul
« Reply #15 on: September 28, 2016, 09:33:13 PM »
Quote from: CGS on September 13, 2016, 08:30:52 AM
Fun job for sure.... make sure the grease you are using is rated at 500F & a pump every day or two

We use only Jet-Lube 31850, good to 600F.
Logged
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3527
Re: Sprint 2000 Circulation Blower Overhaul
« Reply #16 on: October 08, 2016, 12:19:04 PM »
.
Logged
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline DonR

  • Full Member
  • ***
  • Posts: 140
Re: Sprint 2000 Circulation Blower Overhaul
« Reply #17 on: August 20, 2018, 06:27:32 PM »
My Sprint is starting to get loud. No rattle but it's getting hard to talk when standing next to it. How loud do these get before you need to rebuild?
« Last Edit: August 20, 2018, 08:21:07 PM by DonR »
Logged

Offline LuckyFlyinROUSH

  • !!!
  • Sr. Member
  • ****
  • Posts: 334
Re: Sprint 2000 Circulation Blower Overhaul
« Reply #18 on: August 20, 2018, 09:25:19 PM »
To where you cant talk. Once you install the new bearings you'll be surprised at how quiet it is. Budget a day of cussing to get the old bearings off.
Logged
I spend too much money on equipment...

Offline LoneWolf2

  • Sr. Member
  • ****
  • Posts: 283
Re: Sprint 2000 Circulation Blower Overhaul
« Reply #19 on: August 21, 2018, 12:20:04 AM »
Yep, once it starts rattling a little, go ahead and do the swap before they get bad and you have to grind the damn things in two. Turns a couple hour job into an all day pain in the ass.
Logged

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7793
Re: Sprint 2000 Circulation Blower Overhaul
« Reply #20 on: August 21, 2018, 08:51:30 AM »
how often do you guys replace the bearings?
Logged
Pages: 1 [2]   Go Up
« previous next »