Author Topic: If I had time...  (Read 5841 times)

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 580
If I had time...
« on: December 28, 2020, 01:11:53 PM »
I'd love to get a welder just to see what I could make with these, but we all know how time for fun things goes.  :-\
Tees and Coffee


Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5274
Re: If I had time...
« Reply #1 on: December 28, 2020, 03:50:39 PM »
I got a stack outside back also, going to send them to Spotcolor to be re-mesh, a few anyway to see if I'm really saving money
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2871
Re: If I had time...
« Reply #2 on: December 29, 2020, 10:26:04 AM »
If either of you have 23*31's, I'll buy them.
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6042
Re: If I had time...
« Reply #3 on: December 31, 2020, 11:20:44 AM »
You know, Gorilla Glue would stick them together real well... (I do not work for Gorilla Glue)

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline screenxpress

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2428
Re: If I had time...
« Reply #4 on: December 31, 2020, 01:41:30 PM »
Drill holes to bolt them together, bolt to the wall, set plywood on top and use for Shelves.

No welding required
Anything important is never left to the vote of the people. We only get to vote on some man; we never get to vote on what he is to do.  Will Rogers

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: If I had time...
« Reply #5 on: December 31, 2020, 06:41:03 PM »
Tom,
You take some great photography why not take your photos and use the print frames as picture frames.
I am sure someone on you tube is most likely doing this.

mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 580
Re: If I had time...
« Reply #6 on: January 01, 2021, 10:29:17 AM »
Drill holes to bolt them together, bolt to the wall, set plywood on top and use for Shelves.

No welding required

I've made a table and a few rolling film storage racks with them.
Tees and Coffee

Offline screenxpress

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2428
Re: If I had time...
« Reply #7 on: January 01, 2021, 03:50:23 PM »
Drill holes to bolt them together, bolt to the wall, set plywood on top and use for Shelves.

No welding required

I've made a table and a few rolling film storage racks with them.

Nice.....
Anything important is never left to the vote of the people. We only get to vote on some man; we never get to vote on what he is to do.  Will Rogers