Author Topic: Emulsion Thickness Gauge  (Read 6158 times)

Offline BP

  • Sr. Member
  • ****
  • Posts: 380
Emulsion Thickness Gauge
« on: February 24, 2021, 07:39:40 AM »
Has anyone tried to use a Digital paint thickness gauge for checking EOM?
SHIRT HAPPENS!


Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Emulsion Thickness Gauge
« Reply #1 on: February 24, 2021, 09:08:19 AM »
I don't see why it would not work. You may need to place a backer sheet of some sort on the squeegee side of the screen but you should certainly get a relative value read.
From there you can simply record the values relative and make a reasonable assessment on the EOM.
Lastly not sure who but one of our board members published an excellent detail on EOM, i don't locate it at the moment ...try searching the forum.
mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Emulsion Thickness Gauge
« Reply #2 on: February 24, 2021, 12:35:40 PM »
More than one member has mentioned this particular one,  (though many others have gone the $600 route)
There are a few threads on the subject.
https://www.ebay.com/c/18009468597
That rug really tied the room together, did it not?

Offline Maxie

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1328
Re: Emulsion Thickness Gauge
« Reply #3 on: February 25, 2021, 04:33:30 PM »
I have one of those (or very similar).    Works well.    It has a metal disk that you hold under the screen while you are measuring.
Maybe the very expensive ones are more accurate but I am more interested in consistency and this one does the job.
Maxie Garb.
T Max Designs.
Silk Screen Printers
www.tmax.co.il