Author Topic: Pad Printing Cliches  (Read 2500 times)

Offline Pangea

  • !!!
  • Full Member
  • ***
  • Posts: 228
  • Jack of all trades, master of none.
Pad Printing Cliches
« on: February 06, 2021, 06:34:39 PM »
After 4 months I finally got our used single color pad printer up and running (we weren't able to test it when we got it, cheap CL find). We plan on figuring out the plate making procedure but in the meantime are dying to start using it for internal promo. Anyone here make plates? Looking for 100mm x 220mm thin photopolymer/steel with an image on the top and bottom.


Offline royster13

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1975
Re: Pad Printing Cliches
« Reply #1 on: February 07, 2021, 01:29:06 AM »
https://www.inkcups.com/pad-printing-supplies/pad-printing-plate-materials/

Good luck....I have been eying a 4 colour unit that has been for sale for months....But I bought a cylindrical printer a few months back and want to get that going first....

Offline Pangea

  • !!!
  • Full Member
  • ***
  • Posts: 228
  • Jack of all trades, master of none.
Re: Pad Printing Cliches
« Reply #2 on: February 07, 2021, 05:13:35 PM »
https://www.inkcups.com/pad-printing-supplies/pad-printing-plate-materials/

Good luck....I have been eying a 4 colour unit that has been for sale for months....But I bought a cylindrical printer a few months back and want to get that going first....

Contacted them, we'll see if I hear back tomorrow/this week.

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5274
Re: Pad Printing Cliches
« Reply #3 on: February 07, 2021, 10:30:09 PM »
We bought the whole printa system new years back manual one color, loss our butt's on that but we still have it and some plates, they might still be good don't know.
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!