Heat Seal - Heat Press - Whatever you want to call it! > General Heat Seal

Mark showing after press

(1/3) > >>

Maxie:
Is there any way to reduce or stop the marks you get on garments using a hear press.
Usually the edge of the platen shows.
I think it'll go away after washing but I'd like to deliver without marks.

BP:
Mist some water on them when hot. 

Dottonedan:
Agreed.  Most things I’ve heard of on this subject have to do with adding moisture and evaporating that moisture right after.  It’s just smashed fibers causing the discolor.
Like you said, will go away after the wash, but people to see it and ask questions.

3Deep:
If at all possible reduce your pressing pressure also

inkman996:
We struggle with a lot of the polyester shirts. We thought DTF was going to be a game changer for polos. Cleaner logos, no puckering etc. But we cannot find a good enough poly polo that does not leave heat press marks. We tried washing, raft paper and even bought an expensive steam clean set up. Nothing works for the poly.

Navigation

[0] Message Index

[#] Next page