Heat Seal - Heat Press - Whatever you want to call it! > General Heat Seal

Cutting Strip replacement on vinyl cutters (HTV or Cold)

(1/2) > >>

Frog:
Do you guys change these out at regular intervals as part of maintenance? If so, how often?
What are the symptoms of one needing to be replaced?

aauusa:
I wil change our when it starts to have inconsistence in cutting or I can feel the groove on the strip.   

Sbrem:
Once in a while I'll inspect it; if it has a groove, it's time. Dirt cheap and fast and easy at least.

Steve

inkman996:
When it starts to show signs of wear I peel it up and turn it and stick it back down. That doubles the life. Then replace when needed. They are fairly cheap

3Deep:
Good info didn't even know you could do that, we've only had our cutter now for a little over a year, but still will check that strip as we've done a buttload of cutting during sports season.

Navigation

[0] Message Index

[#] Next page