Tutorials/Training Video or Step by step process. > Art/Separation Tutes
vinyl names
Sbrem:
We are changing our offerings in some stores to use vinyl names for right fronts and left sleeves, so we can keep better control of it. We checked with the customers first of course, and they are fine with it. A question came up as to use the same point size for all names, as "Joe" would be rather short and "Mr. Dunnigan" would be on the long side. My thought is that they should all be the same point size, for consistency, but others here think it may be better to use different sizes depending on the name itself. So, I thought I'd poll the folks here who have done similar work for their thoughts. So, your thoughts?
Steve
Frog:
Same font pt. size for sure. However, especially on backs, if there is any issue with fitting easily, I often adjust with kerning and condensing. Never have with pocket type names.
My ongoing problem with names on the backs of little League shirts is that "LEE" is on the large, while "HUSAKOWSKI" goes on the small!
inkman996:
We always use same point size, both for vinyl and embroidery. Then we customize the names individually, stretch or squeeze, even increase the letter spacing a little on short names.
Homer:
same size in height, however the length can be adjusted / condensed if needed. Adjust kerning if you really need to. We run into that when kids choose to be cool and use names like "Awesome McKickass".... doesn't fit on a sleeve too well.
Sbrem:
--- Quote from: Homer on September 20, 2022, 12:30:50 PM ---same size in height, however the length can be adjusted / condensed if needed. Adjust kerning if you really need to. We run into that when kids choose to be cool and use names like "Awesome McKickass".... doesn't fit on a sleeve too well.
--- End quote ---
Our schools won't let the kids do that, that's a pretty funny one though...
Steve
Navigation
[0] Message Index
[#] Next page
Go to full version