Author Topic: Let me Start again....  (Read 4764 times)

Online siestasol

  • Verified/Junior
  • **
  • Posts: 80
Let me Start again....
« on: September 01, 2023, 11:10:04 AM »
It's time to revisit the emulsions..., I have been using the CCI HXT Blue for 4/5 years, no problems, and I will continue to use it, because is cheap, perform very well with the LED exposure, with plastisols, long runs, good reclaiming, no problems with all the chemicals( screen wash, screen opener, etc.), But...
on the water/discharge side, We haven't found "the" emulsion, We have tried several (ready to use, diazo, ...) but without luck, always some problem..., We have tried "hardener", but sometimes in the long runs are not enough... We have LED exposure unit and We have metal halide(MSP3140).
Let me know, What are you using this days...

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2064
Re: Let me Start again....
« Reply #1 on: September 03, 2023, 03:31:17 AM »
We use Murakami T9 (pink) and/or CCI ProChem® L.X.P. L.E.D. Optimized Emulsion.

They both work great for all ink types. Never had a problem with discharge or waterbase inks.

Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1474
Re: Let me Start again....
« Reply #2 on: September 03, 2023, 09:02:06 AM »
I second the Murakami T9.  We've used it for about 5 years now and never had any problems.
It's not a job if you love doing it.

Online mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7813
Re: Let me Start again....
« Reply #3 on: September 05, 2023, 11:18:50 AM »
t9 is pretty good, we are running Chromaline CP Tex and it's been great. it takes longer to expose, which for us is a good thing because we have a 7500w light and it's hard to dial in a faster exposing emulsion.