screen printing > Equipment

Dropping squeegees

(1/3) > >>

Doug S:
Hey everyone.  I have a 2010 sportsman e.  I've had 1 head that has randomly dropped squeegees.  This morning I had another head start.  I've got 20 more psi to the press than what it calls for.  I don't hear any air leaking.  I know I could call M&R but was hoping someone here has had that problem and could give me the short and quick of it.  Thanks in advance.

whitewater:
Hi - what do you mean by dropping squeegees?

Doug S:
Usually during the print stroke but sometimes while it's flooding.  The squeegee holder just drops the squeegee in the screen.  You can imagine the mess that creates. 

mk162:
are the clamps bent at all?  are the squeegees damaged where the clamps attach?

Doug S:
I know the squeegees are ok and made double sure the grooves are clean.  As far as the clamps I’ll have to give them a closer inspection but I haven’t seen anything obvious yet.  I’ll check that first thing

Navigation

[0] Message Index

[#] Next page