screen printing > Equipment

Using M&R sprint as conveyer belt while gas is shut off

(1/2) > >>

mhimple:
We have a mini sprint and a sprint 3000. The city is updating our gas lines and we will have no gas for two days.
We have 5k in inside size tags to print and figure we can use a press to print size tags and just flash cure them while the shop is down.
Since the belts don't speed up till the dryers reach temp, we are not able to use the dryer as just a conveyer belt since it maxes at 2fpm.
Does anyone have a work around? I figure not because of potential safety issues. M&R tech hasn't responded as well.
Thanks for any help,

zanegun08:
Your work around is to not use the conveyor, go from one cart, and unload onto another cart, now it's a 2 person job instead of 3.

I'll DM you my venmo for the labor I just saved you, it's Friday and the bar is calling my name.

mhimple:
Shiiiittttt,
Perfect answer for a brain fart question :D
Thanks,

Admiral:
Consider adding some nylobond to the ink too, since it won't quite be fully cured on the press?

Frog:

--- Quote from: Admiral on March 29, 2024, 03:56:47 PM ---Consider adding some nylobond to the ink too, since it won't quite be fully cured on the press?

--- End quote ---

Do you not find that the ink can become a little more stiff or brittle with that?
Of course, with the OP's particular present project of small tags, it wouldn't be as much of an issue.

Navigation

[0] Message Index

[#] Next page