Author Topic: Squeegee Sharpener  (Read 2581 times)

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 619
Squeegee Sharpener
« on: June 10, 2024, 10:46:16 AM »
Thoughts on this https://www.advancedscreenprintsupply.com/product2502.html.
Also, how many sharpen or just replace? My volume is no where near some of you, so when
both sides get dull I just replace. Not sure how long it would take to get my ROI back on this.
Tees and Coffee


Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5681
Re: Squeegee Sharpener
« Reply #1 on: June 10, 2024, 11:09:42 AM »
Opinions definitely vary on this but I would replace blades. Do the math and you'll probably agree.

Offline Admiral

  • Hero Member
  • *****
  • Posts: 890
Re: Squeegee Sharpener
« Reply #2 on: June 10, 2024, 11:13:15 AM »
We sharpen a couple of times a year.  Replace when half an inch or more is gone (roughly). 

Offline CBCB

  • !!!
  • Sr. Member
  • ****
  • Posts: 490
Re: Squeegee Sharpener
« Reply #3 on: June 11, 2024, 06:55:56 AM »
Opinions definitely vary on this but I would replace blades. Do the math and you'll probably agree.
What is your math?

Can you switch a blade quicker than throwing it on sharpener?

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1883
Re: Squeegee Sharpener
« Reply #4 on: June 11, 2024, 10:03:00 AM »
I can! But we do both.
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5681
Re: Squeegee Sharpener
« Reply #5 on: June 11, 2024, 10:37:09 AM »
To do it correctly on a diamond bit, usually three sets of passes, Coarse, medium, fine. And you need to do it slowly IMO. Takes too long. Don't need press ops doing this for sure.... thats where my math lies. Press downtime. Slap a new blade in and go is how I always roll. Plus that 2K tag plus shipping is a hard nut to swallow for a small, med shop. When I ran the larger shops w/ 8+ presses and we had a maintenance dept then, well sure, cycle them through and sharpen as needed. The M&R quip clip or whatever, allows you to switch blades in seconds. Again not bad Investment for a mulitiple auto shop.
Also part of the math....144" roll of squeegee = btwn $120/$170. (nine 16" blades,about $10. ea)
« Last Edit: June 11, 2024, 11:00:33 AM by tonypep »

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2073
Re: Squeegee Sharpener
« Reply #6 on: June 11, 2024, 07:52:51 PM »
Many years ago we considered buying a squeegee sharpener. But for 2K + shipping I can buy boatloads of very good squeegee rubbers on Alibaba.com, which we did. And I don`t have another piece of equipment standing around that`s barely been used. Changing a squeegee blade doesn`t take much time either.

Offline CBCB

  • !!!
  • Sr. Member
  • ****
  • Posts: 490
Re: Squeegee Sharpener
« Reply #7 on: June 12, 2024, 08:21:33 PM »
Many years ago we considered buying a squeegee sharpener. But for 2K + shipping I can buy boatloads of very good squeegee rubbers on Alibaba.com, which we did. And I don`t have another piece of equipment standing around that`s barely been used. Changing a squeegee blade doesn`t take much time either.
Now this is some logic I can get behind, and that I haven’t heard before.

I use a belt sander style one we got for cheap from an old sign shop. And the top is a table with our white ink area with a drill press and the 5ers/quarts. So that is not really accessible to another shop to just find a used squeegee sharpener.

The ROI is gunna be the simplest logic but how much is a non-Alibaba roll these days? I used to buy a lot of rolls for a baby shop before we had the sharpener. For a one-auto shop it’s gotta be less than like two years.

Really good points.

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5681
Re: Squeegee Sharpener
« Reply #8 on: June 13, 2024, 07:45:17 AM »
Using my supplier, costs for a dual durometer squeegee (bought in rolls) $2,000 buys enough material for 105 (16") squeegees. So you can use that for your math if you like. Also factor in how often you need new (or sharpened) blades which will vary quite a bit depending on multiple variables.

Offline 1964GN

  • Hero Member
  • *****
  • Posts: 833
Re: Squeegee Sharpener
« Reply #9 on: June 13, 2024, 09:07:05 AM »
I have never understood why you would want to sharpen squeegees for an auto press. I wouldn't want 40 squeegees all at different heights

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5681
Re: Squeegee Sharpener
« Reply #10 on: June 13, 2024, 10:17:02 AM »
True enough, especially for those huge shops who record squeegee parameters for all process/sim process orders for repeatability. Durometer/speed/angle/pressure, etc.

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4278
Re: Squeegee Sharpener
« Reply #11 on: June 14, 2024, 11:38:26 AM »
We have a professional type unit complete with diamond nub to dress the wheel.

I have never been able to do anything with it but burn rubber. We now use it to round corners.


Does anyone flip rubber to a new edge? The thought is always tempting but by the time you've got
the old rubber out and the holder cleaned we always just replace it.

Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1481
Re: Squeegee Sharpener
« Reply #12 on: June 14, 2024, 06:09:15 PM »
We flip the squeegees and use the unused part.  The only disadvantage is the grooves left where it was clamped.  They are a little harder to clean.
It's not a job if you love doing it.

Offline CBCB

  • !!!
  • Sr. Member
  • ****
  • Posts: 490
Re: Squeegee Sharpener
« Reply #13 on: June 15, 2024, 05:20:19 PM »
We flip the squeegees and use the unused part.  The only disadvantage is the grooves left where it was clamped.  They are a little harder to clean.
I do the same thing with my undies to get four uses out of them.

I speculated the squeegee height thing for consistency too but in the end I figured we are adjusting for different garments all the time anyway so the savings would be kinda small?

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2073
Re: Squeegee Sharpener
« Reply #14 on: June 16, 2024, 09:03:14 PM »
We flip the squeegees and use the unused part.  The only disadvantage is the grooves left where it was clamped.  They are a little harder to clean.


I speculated the squeegee height thing for consistency too but in the end I figured we are adjusting for different garments all the time anyway
I don't follow, what are you adjusting based on garment type?