« previous next »
Pages: 1 [2]   Go Down

Author Topic: Exposure unit recommendations.  (Read 637 times)

Offline farmboygraphics

  • Hero Member
  • *****
  • Posts: 591
Re: Exposure unit recommendations.
« Reply #15 on: July 25, 2024, 08:52:41 AM »
Quote from: bimmridder on July 25, 2024, 08:41:07 AM
If you don't have the power, this is all a moot point
Dave

I've got plenty of juice here.  :D
Are there any sellers I should stay away from? I remember a big dust up with one a few years ago.
Logged
Tees and Coffee

Offline Evo

  • Hero Member
  • *****
  • Posts: 937
  • Anything is possible.
Re: Exposure unit recommendations.
« Reply #16 on: July 25, 2024, 03:04:03 PM »
Quote from: farmboygraphics on July 25, 2024, 07:53:41 AM
Quote from: Evo on July 24, 2024, 08:03:38 PM
Used M&R MSP 3140 exposure units (and most any single point metal halide units) are going for next to nothing these days. If you are still on film these are fantastic units and you can dial in your exposure and lock it in with the built in integrator.
Just to make sure I'm looking at the correct model, these are 110 volt?

I had one that was 120V, 18 amp. If I recall the transformer wiring inside can be swapped around for different inlet voltages.
Logged
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)
Pages: 1 [2]   Go Up
« previous next »