Author Topic: Accurip tiling issue  (Read 1498 times)

Offline myseps

  • Full Member
  • ***
  • Posts: 154
  • Master Color Separator
Accurip tiling issue
« on: June 14, 2012, 11:52:22 PM »
Anyone ever see this?  This happens when printing multi colors with Accurip Large format.
The first color prints fine, then the 2nd color only prints a small 3" section of the film, and all of the rest of the colors are missing.

This only happens occasionally when using 24" media, but when I am using 44" media it happens every time, so I am forced to print the films 1 by 1. color separations by Scott D.   Follow me on facebook

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Accurip tiling issue
« Reply #1 on: June 15, 2012, 01:02:06 AM »
I have had it happen when I use sheets instead of the role. If I walk away and let it sit waiting for another sheet it will do it every once in a while. I dont know WTF causes it. I was thinking a memory issue with the printer but I dont know.

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin