Author Topic: Could someone try opening this and saving to something I can see?  (Read 2327 times)

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
I have tried everything and cant get it to open.


Online Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13966
  • Docendo discimus
Re: Could someone try opening this and saving to something I can see?
« Reply #1 on: July 13, 2012, 09:02:45 PM »
Looks like it may be time to email or phone the file's provider and ask them what the hell type of file it's supposed to be and do they have something else.
That rug really tied the room together, did it not?

Offline royster13

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1975
Re: Could someone try opening this and saving to something I can see?
« Reply #2 on: July 14, 2012, 08:56:46 AM »
It is  word document.......

Open the file in notepad and you can get some clues....Rename the file to add .docx to the end and it will open....

Offline royster13

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1975
Re: Could someone try opening this and saving to something I can see?
« Reply #3 on: July 18, 2012, 06:19:23 PM »
Did you get the file to open?

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Could someone try opening this and saving to something I can see?
« Reply #4 on: July 18, 2012, 07:27:54 PM »
Whoops. Sorry for not following up. I didn't get this file open but they found a PDF file that worked. Thanks

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6042
Re: Could someone try opening this and saving to something I can see?
« Reply #5 on: July 19, 2012, 07:57:44 AM »
As a handy hint, I save a lot of Word files to pdf, and they work out fairly well in Illustrator after that; not every time, but most of the time...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: Could someone try opening this and saving to something I can see?
« Reply #6 on: July 19, 2012, 11:03:32 AM »
As a handy hint, I save a lot of Word files to pdf, and they work out fairly well in Illustrator after that; not every time, but most of the time...

Steve
Thanks Steve I'll keep that in mind

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5271
Re: Could someone try opening this and saving to something I can see?
« Reply #7 on: July 19, 2012, 12:22:50 PM »
Steve thanks too, I'll keep that in mind as I get a lot of word art LOL

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6042
Re: Could someone try opening this and saving to something I can see?
« Reply #8 on: July 19, 2012, 04:09:28 PM »
I open them in Word, and save from there. The Microsoft art that Word gets you free online, is also vector, same thing, insert into the Word doc, then save to pdf. I like to "Place" them in Illustrator, then use "Expand Transparency" on it. Just to finish the hint...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Online Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13966
  • Docendo discimus
Re: Could someone try opening this and saving to something I can see?
« Reply #9 on: July 19, 2012, 06:08:21 PM »
I open them in Word, and save from there. The Microsoft art that Word gets you free online, is also vector, same thing, insert into the Word doc, then save to pdf. I like to "Place" them in Illustrator, then use "Expand Transparency" on it. Just to finish the hint...

Steve

Watch out on some of that stuff. We found out a few years back that the Microsoft Office online art had a no commercial use stipulation.
That rug really tied the room together, did it not?

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6042
Re: Could someone try opening this and saving to something I can see?
« Reply #10 on: July 20, 2012, 10:41:01 AM »
Good point. Take my example as for "educational purposes only"... :D

Steve
I made a mistake once; I thought I was wrong about something; I wasn't