Ink suitable for printing Tyvek?

[squeegee]

I have a run of about 700 Tyvek "marathon" jackets and need an ink (just black) for them.  This material is the stuff that painter's wear like in a paint booth, basically it's like the white overall suits that are used once and then thrown away.

I think the material has a melting point of around 250F so plastisol is out of the question.

TIA

[Clark]

I printed thousands of tyvek windsocks with good ol Nazdar Air-Dry Solvent ink.  Held up for years.

[Fresh Baked Printing]

I printed thousands of tyvek windsocks with good ol Nazdar Air-Dry Solvent ink.  Held up for years.

How fast does it dry? Can you print and stack?

[Clark]

depends on the amount of ink you are depositing, but I just ran mine through the conveyor at room temp and when they got to the other side, we stacked.

[squeegee]

Do you happen to know the number or name of the ink series you used?

[Frog]

The substrate chart from Nazdar shows a few suitable inks.

The 9700 is a good stand-by, is that the one you use Clark?

[Sbrem]

We like the NazDar 9500 series for that, we used to print election signs with it, and it's a good multi-purpose air dry ink.

Steve

[Clark]

I can't recall which series we used...sorry it's been a few years and I've been around alot of discharge ink since then.

[squeegee]

Thanks guys.  I had some old 9700 Nazdar black and it works like a charm.