« previous next »
Pages: [1]   Go Down

Author Topic: Inked in New Hampshire  (Read 4172 times)

Offline TheInkJedi

  • Verified/Junior
  • **
  • Posts: 17
  • Ink Dept. for Coed Sportswear
Inked in New Hampshire
« on: July 29, 2019, 10:10:43 AM »
Greetings to one and all. I found this forum while researching various inks in an effort to learn what the heck they actually do. I'm the ink mixer/quartermaster for a medium sized company in New Hampshire. While I have held the position for almost two years, I still have a lot to learn. While my focus is primarily on inks, I have also been a Press OP, Off-loader, and shirt stacker. I figure the more I know about what each job needs and deals with, the more I can help them. Disgustingly team oriented, I know. LOL I have found a world of information on these pages and wanted to say thank you all, especially the admin.s, and please don't mind the noob lurking in the back.
 
Logged
"Each problem that I solved became a rule, which served afterwards to solve other problems." ~ Rene Descartes

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Inked in New Hampshire
« Reply #1 on: July 29, 2019, 10:27:15 AM »
You, as all newbies are welcome, and often pose questions which help even seasoned pros up their game.
Logged
That rug really tied the room together, did it not?

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Inked in New Hampshire
« Reply #2 on: July 29, 2019, 05:17:34 PM »
Like you, I had to know it all, print, art, darkroom photography, which turned into digital later, meshes, inks, etc... Knowledge is power! And, welcome to the board, really good folks here.

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't
Pages: [1]   Go Up
« previous next »