Author Topic: Need an ink recommendation for 100% poly performance tees  (Read 3732 times)

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: Need an ink recommendation for 100% poly performance tees
« Reply #15 on: February 13, 2013, 11:39:12 AM »
We've had our best luck with the Rutland...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't


Offline siestasol

  • Verified/Junior
  • **
  • Posts: 84
Re: Need an ink recommendation for 100% poly performance tees
« Reply #16 on: February 13, 2013, 12:07:17 PM »
If you want to avoid migration at all, underbase with  Rutland NPT grey barrier and a poly white on top. Nice prints.

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Need an ink recommendation for 100% poly performance tees
« Reply #17 on: February 13, 2013, 12:43:00 PM »
If you want to avoid migration at all, underbase with  Rutland NPT grey barrier and a poly white on top. Nice prints.

With an ink as effective against dye migration as the Gray Barrier, why bother with another poly ink on top? Sure, I can buy the "better safe than sorry", but why not take advantage of the usual better printatbility of an ink not poly specific?

I print manually, so the unfriendliness of most Poly inks is especially noteworthy to me.
That said, almost across the board, whites have really improved in this regard over the years.
That rug really tied the room together, did it not?

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Need an ink recommendation for 100% poly performance tees
« Reply #18 on: February 13, 2013, 12:58:21 PM »
You can run standard top colors over a dye blocking base but they cure at higher temp and have different stretch properties so I like to run performance colors as well.

Offline GaryG

  • !!!
  • Hero Member
  • *****
  • Posts: 750
Re: Need an ink recommendation for 100% poly performance tees
« Reply #19 on: February 13, 2013, 01:17:09 PM »
We use Wilflex Extreme regularly and have found- 156-  2 hits / Revolver / 1 hit out.
Or set up 2-156's - one time around and out. Gas dryer at 330 max. -netting approx. 300. (Normally 350)
Not so much blowing agent as Quick White and covers very well. Hope this helps.

Offline trebor

  • Full Member
  • ***
  • Posts: 134
Re: Need an ink recommendation for 100% poly performance tees
« Reply #20 on: February 13, 2013, 01:41:35 PM »
Here is what we do.......

SportFlex Technology



We can offer you contract services on your tough to print garments.


And this too!

SportFlex and Heat
« Last Edit: February 13, 2013, 02:11:43 PM by trebor »

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Need an ink recommendation for 100% poly performance tees
« Reply #21 on: February 13, 2013, 02:27:55 PM »
What type of ink is that Trebor? Curious minds want to know.... ;D
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline trebor

  • Full Member
  • ***
  • Posts: 134
Re: Need an ink recommendation for 100% poly performance tees
« Reply #22 on: February 13, 2013, 03:17:49 PM »
SportsFlex Technology.....it something we have been working on for years. Put it into full production last year. It was about 8% of revenues. This year it will approach 30-35%.

Online aauusa

  • Hero Member
  • *****
  • Posts: 826
Re: Need an ink recommendation for 100% poly performance tees
« Reply #23 on: February 13, 2013, 04:02:52 PM »
is that sports flex  tech.  a silicon based ink with 2 parts and a dye?


Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7863
Re: Need an ink recommendation for 100% poly performance tees
« Reply #24 on: February 13, 2013, 04:37:43 PM »
He ran the horse white through our dryer(and printed it here).  I didn't get to see the wash tests.  It's a little glossy for my liking, they added something to make it that way so it works for athletic printing.

Also, I find it to be a little thick, I would prefer it to be a little thinner, you have to use a special thinner for it as well.  You won't cure regular reducer in it, you need low-cure reducer.

Sonny, can you guys get me some matte Horse white?


Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Need an ink recommendation for 100% poly performance tees
« Reply #25 on: February 13, 2013, 05:27:14 PM »
Sonny, can you guys get me some matte Horse white?
Yep
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald