« previous next »
Pages: [1]   Go Down

Author Topic: Screen Mesh For water base  (Read 2542 times)

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Screen Mesh For water base
« on: July 07, 2011, 04:03:13 PM »
What screen mesh sizes are you guys using for your discharge whites?
Logged
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Online ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4246
Re: Screen Mesh For water base
« Reply #1 on: July 07, 2011, 04:09:01 PM »
About like plastisol, 125-280. Depending on detail, and as low as it will allow.
Nothing like ripping through a huge white on black order with 1 fast stroke and
no flash.
Logged

Offline squeegee

  • Sr. Member
  • ****
  • Posts: 379
Re: Screen Mesh For water base
« Reply #2 on: July 07, 2011, 08:55:09 PM »
150 S murakami.
Logged

Online Evo

  • Hero Member
  • *****
  • Posts: 928
  • Anything is possible.
Re: Screen Mesh For water base
« Reply #3 on: July 08, 2011, 12:01:25 AM »
Quote from: ebscreen on July 07, 2011, 04:09:01 PM
About like plastisol, 125-280. Depending on detail, and as low as it will allow.
Nothing like ripping through a huge white on black order with 1 fast stroke and
no flash.

I'm about there too. Typically 160 for general printing and up to 230 or so for higher detail. This is for a "top" white, not underbasing.
Logged
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey.
John Ruskin (1819 - 1900)

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Screen Mesh For water base
« Reply #4 on: July 08, 2011, 12:11:49 AM »
Thanks guys. This is some pretty cool stuff to play with.
Logged
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline squeegee

  • Sr. Member
  • ****
  • Posts: 379
Re: Screen Mesh For water base
« Reply #5 on: July 08, 2011, 05:49:08 AM »
Murakami 225 S is another for higher detail that we like for discharge/WB.  Thin threads, ink passes through more easily.
« Last Edit: July 09, 2011, 09:22:33 PM by squeegee »
Logged

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5624
Re: Screen Mesh For water base
« Reply #6 on: July 08, 2011, 06:41:21 AM »
Runs the gamut..........110-355 depends on detail
Logged

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Screen Mesh For water base
« Reply #7 on: July 09, 2011, 08:59:54 PM »
man for years i ran straight waterbase discharge...loved sericol.. but today in my shop with the heat in south carolina i'm sticking with the plasticharge.. works great and you can get white xxx whites. most colors using union maxopakes is a 50/50.. reds and yellows being 70/30 with 5% activator..
Logged
Specializing in shop assessment's, flow and efficiency
Pages: [1]   Go Up
« previous next »