TSB
screen printing => Equipment => Topic started by: Denis Kolar on May 20, 2011, 12:27:27 PM
-
Here is another newbie question.
Where to attach the bracket to a sleeve pallet? (I know that it should be under the pallet :) )
I have a set of new sleeve pallets that I need to attach to the brackets and they look similar to these:
(http://i.ebayimg.com/17/!B+ugQSQCWk~$%28KGrHqF,!lsEz+4J5i0DBN!ljis%28%28!~~_35.JPG)
They have rounded edges and melamine coating, not plain like these.
Do I attach the bracket right under the wide area or i move it slightly forward to the narrow part.
A pic would be awesome if someone has these handy.
And BTW, this is for manual machine :)
-
That board is obviously set up to mount a bracket in the back on the wide area.
That should also help on clearance issues since some brackets and press arms don't fit in some sleeves.
That's a good reason for the outrigger styles, that also, if double, allow both sleeves to be printed at the same time.
Here's the way I added mounts to my DIY's