TSB
Computers and Software => Computers and Software - General => Topic started by: jake899 on September 24, 2018, 03:33:57 PM
-
I realize there are many other posts on printers. However with availability and products constantly changing, I'm asking.
Is there a good printer for a newbie starting with none that will last a while and do a good job? Wide format probably best I assume.
Price really isn't a problem as long as it's quality and will be worth the expense.
Thank you!
-
I realize there are many other posts on printers. However with availability and products constantly changing, I'm asking.
Is there a good printer for a newbie starting with none that will last a while and do a good job? Wide format probably best I assume.
Price really isn't a problem as long as it's quality and will be worth the expense.
Thank you!
Jake,
what would you use the printer for?
pierre
-
TO clarify, We should ask, is it to print films or to print shirts? Like a screen print press or a digital film printer? Sometimes people mix the names up.
-
TO clarify, We should ask, is it to print films or to print shirts? Like a screen print press or a digital film printer? Sometimes people mix the names up.
Nope, the phrase "wide format" zoomed me right in on an inkjet printer.
I think that Pierre wanted to narrow it down to films? proofs? sublimation or even pigment ink transfers?
-
I apologize. To print films to transfer to making screens.
-
TO clarify, We should ask, is it to print films or to print shirts? Like a screen print press or a digital film printer? Sometimes people mix the names up.
Nope, the phrase "wide format" zoomed me right in on an inkjet printer.
I think that Pierre wanted to narrow it down to films? proofs? sublimation or even pigment ink transfers?
Let me quote your quote.
There are some presses for flat stock that are pretty wide format. 4' 12' is pretty wide. ;) But yea, you're right.
-
I realize there are many other posts on printers. However with availability and products constantly changing, I'm asking.
Is there a good printer for a newbie starting with none that will last a while and do a good job? Wide format probably best I assume.
Price really isn't a problem as long as it's quality and will be worth the expense.
Thank you!
in a nutshell,
for low dollars EPSON 4880 is a great printer. If spending more, new EPSON T3270 is getting pretty good reviews.
pierre
-
There is also the economy new or refurbished Epson 1430.
-
Isn't the 4880 discontinued though? (I ask because from reading other posts you know enough that I trust your advice) I know I can find a 4880, but I don't want to be in a jam for aid in two years if I bought one. Maybe that's not the case in a printer like this, and I'd have little problem in that area?
Again, thank you for the help! I'm glad I was recommended to this board!
-
as Rick mentioned, 1400 series is a nice little printer, but in my eyes is a little slow and fiddly. 4880 has been off the market for a while and thus the cheap price (you should not be paying more than $500 for it). It is a heavy duty commercial grade printer that should last you for a while. I uses rolls, so no need to keep feeding paper. The ink cartridges are significantly bigger (220ml compared to under 10ml) and last longer. It prints much faster too. . .
1400 series is disposable . If something goes wrong, you have to throw it out. 4880 can be fixed, but unless you are doing it yourself, it will be expensive.
pierre