TSB
General => Manufacturer's section => M&R => Topic started by: cbjamel on April 07, 2022, 06:58:21 PM
-
Bulb is out of this world cost. Have anybody used these guy bulbs?
http://www.caprockdev.com/Exposure%20Lamps/PD-41.htm (http://www.caprockdev.com/Exposure%20Lamps/PD-41.htm)
Also trying to replace the fluorescent bulb thought the back unscrewed and you could replace it. What am i doing wrong? unscrewed but wont budge.
Thanks,
Shane
-
Bulb is out of this world cost. Have anybody used these guy bulbs?
[url]http://www.caprockdev.com/Exposure%20Lamps/PD-41.htm[/url] ([url]http://www.caprockdev.com/Exposure%20Lamps/PD-41.htm[/url])
Also trying to replace the fluorescent bulb thought the back unscrewed and you could replace it. What am i doing wrong? unscrewed but wont budge.
Thanks,
Shane
did you call douthitt?
-
Caprock is a good supplier for bulbs. Used to use them all the time for our old Amergraph unit. When we got our olec a few years ago I shopped several suppliers for our until we finally settled with Douthitt. For whatever reason the OEM’s seem to last a little longer. For something so critical to production, I don’t mind spending the $$. We get about 4-6 months out of em
-
Bulb is out of this world cost. Have anybody used these guy bulbs?
[url]http://www.caprockdev.com/Exposure%20Lamps/PD-41.htm[/url] ([url]http://www.caprockdev.com/Exposure%20Lamps/PD-41.htm[/url])
Also trying to replace the fluorescent bulb thought the back unscrewed and you could replace it. What am i doing wrong? unscrewed but wont budge.
Thanks,
Shane
did you call douthitt?
don't know why I would? what don't I know?
Shane
Sent from my SM-G975U using Tapatalk
-
I'd call M&R since they made it. We bought many a bulb from Caprock over the years, until we went LED. It's a good company, and have been around forever. I used to buy halftone screens from them (how halftones were made pre-digital) back in the late '70's. The last time we had to get a new bulb for our Violux 5000s it was just under $200.00...
Steve
-
The whole reflector with lamp slides out. There are 1 or 2 hidden screws to take out and then it will slide out.
-
Yea i know how to change the exposure bulb. The florescent is what i cant figure out.
Shane
-
Why the heck is there a fluorescent bulb in it? Does it light a panel or something?
Steve
-
so you can see the film on screen is correct or dirt. inspection lamp.
Shane
-
so you can see the film on screen is correct or dirt. inspection lamp.
Shane
Ah, I get it. I've always had a stand alone light source and stand alone vacuum frame...
Steve
-
Post pictures.