TSB
Computers and Software => RIPs => Topic started by: BrazosDesigns on February 27, 2019, 06:32:18 PM
-
Has anyone been successful in getting Wasatch SoftRip setup as a dual ink setup for screen black on the left inks and sub ink on the right inks? Dual Cmyk? I have version 7.2, but it should be similar for most versions.
I have an Epson 4800 that I have film black ink in channel 1 (black) and have used that for about 3 years. I recently picked up an Epson 4880 on a 'for parts' craigslist and got that refurbed and ready for service. These aren't small printers, but very reliable. I wouldn't do sub everyday, so having one printer setup with film ink and sub that I could print a test print on each day would help keep it from clogging.
I'd like one machine for the dual use and have the other machine as a backup in the closet (with cleaning solution in carts, of course).
Any guidance on setting this up, or if it was such a pita that I should just setup the 4880 with all 8 channels of sub ink. I'd rather just use 4 sub inks if possible and not a huge quality difference.
Thanks!
Darren