TSB

screen printing => General Screen Printing => Topic started by: BP on November 27, 2018, 07:11:10 AM

Title: HotHead FlatIron
Post by: BP on November 27, 2018, 07:11:10 AM

So I just got my flatiron up and running. We have ran and few jobs and it works great. But there is a little learning curve for sure. Any tips on temp etc. would be great.

Title: Re: HotHead FlatIron
Post by: IntegriTees on November 27, 2018, 10:14:40 AM

I believe 400 is max. we set ours at 350 and that does the job.

Title: Re: HotHead FlatIron
Post by: im_mcguire on November 27, 2018, 01:01:54 PM

Just curious:
Is there a way to hook one of these up to. Workhorse press?

Title: Re: HotHead FlatIron
Post by: AAP on November 28, 2018, 10:46:07 AM

When running jobs with the flat iron, what's your avg shirts per hour?

Title: Re: HotHead FlatIron
Post by: ffokazak on November 28, 2018, 12:50:39 PM

Its independent of the press. It doesn't hook up to the control panel of a press or anything.

Its essentially a roller that heats up, from the control box which holds all of the controls.