TSB

screen printing => General Screen Printing => Topic started by: Val on January 04, 2019, 01:24:36 PM

Title: LIFT Brand Hi Viz Jackets
Post by: Val on January 04, 2019, 01:24:36 PM

Never printed on Hi-Viz Polyester jackets before. Anyone have any tips? Have a big load of jackets provided by the customer. Big print on back. Black Ink. Printing on a manual. Small electric dryer. Any tips, tricks, ink suggestions, etc are all much-appreciated.

Title: Re: LIFT Brand Hi Viz Jackets
Post by: Frog on January 04, 2019, 02:10:23 PM

Are the jackets lined? Do you have a hold-down? How many is a big load?

Title: Re: LIFT Brand Hi Viz Jackets
Post by: Val on January 04, 2019, 03:02:29 PM

They have a lining - yes. A non-removable thin lining and a removable fleece lining. There are 160 pieces and we do not have a hold-down. Hoping to get by without one but it's not a deal-breaker. We can buy or make whatever we need if there is no other way.

Title: Re: LIFT Brand Hi Viz Jackets
Post by: mooseman on January 04, 2019, 05:51:06 PM

you need a hold down no two ways about it UNLESS you go to someone like Stahls or have a vinyl cutter and can get the graphic produced in heat press vinyl and simply press on the graphic.
Without seeing the graphic hard to be more specific.
mooseman