TSB
Heat Seal - Heat Press - Whatever you want to call it! => General Heat Seal => Topic started by: mooseman on August 31, 2018, 11:21:43 AM
-
Couple questions please
Looking to apply silver reflective to common tee shirts. No ASTM or ANSI standards involved but is for a fire dept.
will cut the designs on Roland 24 in.
What brand material can you recommend example Stahls or Siser or other ?.
One of the designs will be a typical left chest Maltese cross type other large back text.
I am ok with the cutter I think just looking for material experience especially with some finer detail images
Thanks
mooseman
-
Stahl 3m reflective is best durability, expensive but best. I have tried both the 3m and stahls brand, 3m best.
Shane
-
you can also order precut from Stahl's. More expensive, but easier. . .
pierre
-
We've tried a couple, difficult to weed, you really have to get the knife just right and weed slowly... Sister's was pretty good.
Steve
-
Thanks all for your reflection on my inquiry......you guys is da best !
Mooseman
-
really liking the SISER reflective cuts nice doesn't destroy blades and weeds well nothing like the 3M material, much easier to use
-
I use Chemica Hotmark Reflex. I LOVE IT. Chemica just put a warehouse in the metro Atlanta area, and their cad-cut vinyls(or polyurethane) are fantastic.
-
Brad you're lucky dog everything right there at your fingertips, we have a next level warehouse very close by but can't get anything from them thus far.