TSB
screen printing => 4 Color and Simulated Process Printing => Topic started by: Ryan on July 14, 2014, 06:21:54 PM
-
Anyone got advice on a red and yellow to use to better replicate the color in this design? I want to keep the Red a nice bright red, but so far I've used 185c and 1797c (have them on the shelf) and Pantone Yellow C. Anything I should try?
thanks
~Ryan
-
What color are you trying to achieve?
-
the skin color. I'm not real far off, but I feel like if I use a less vibrant red to achieve the skin tone, then the parts that are actually red will be blah!!
-
Ah....
Are your flesh tones looking sunburt then? You may want to go back in and re-sep the image to have less red printing in those areas.
Conversely, a quick fix "might" be to reduce the opacity of your red - add a clear ink of choice. You would need to play to find the correct amount to base it back by.
-
this was my first set of colors I tried (185c and Pantone Yellow c). Again because I had these on the shelf and didn't need to mix anything. More yellowy in the bottom and more Red in the top, still need to tweek some things but wasn't sure if anyone had a go to red/yellow combo to get closer to the skin tone.
-
First off, It's looking really good!
Second, look at your screens versus your films. Are you spraying out every dot? If so, go back and double check your flesh tone seps. Looks like something is off (values in the head versus the body for balance) once the dots are printed.
Again, looks good! The colors you picked are great.
From a technical standpoint, the farther apart the colors are in value/contrast/color wheel (whatever it is really called) the more obvious the attempts at color blending will be. If you pick a gold color and a yellower red, the dots will visually blend together more. A strong red to a strong yellow blend will show discrepancies more readily.
Hope my ramblings make sense :)
Otherwise, I pick a flesh tone to put in :D
-
yeah, to me that would have been easier to pick your spot colors and blend them from there.
that being said, that looks pretty dang good.
-
I second Brad, that looks very very good you might can use a golden yellow, but shoot I'd leave that alone and go for it nice print!
-
Really good work. If you have room split the red and replace the blending red with a magenta/rubine to get a better blend in the skin.
Different
-
Learned many, many moons ago that the standard comic book/Roy Lichtenstein red/Yellow fleshtone percentages are 40% Yellow dots , and 20 or 30% Magenta dots, (against White bkgd)(just figured I would throw that out there!) ....it IS looking pretty cool though!