1
« Last post by Admiral on Yesterday at 03:24:16 PM »
I found this quickly:
"Just called Nazdar and talked to Dan Miller. He said the DA series with DA 176 catalyst is the best for EVA foam. It takes about 24 hours to cross link and should be printed through a 110"
Source:Reddit
Sounds like what you were about to do.
2
« Last post by whitewater on Yesterday at 11:52:41 AM »
Has anyone printed on yoga mats before. We are doing a 1 color on white. I called Nazdar and left a message and the guy called back but I was with a customer and then he left a message.
I keep trying to call back but no one picks up.
I think he said in his message the DA series with a catalyst.
Has anyone used this ink series before?
3
« Last post by whitewater on Yesterday at 09:39:53 AM »
I know this may be a dumb answer, but when we drag and drop into illy we have to " embed" it. Otherwise when we open on a different computer it is not there..
We save our mockups as a pdf in illy and we dont have a problem.
My art guy used to do that all the time, never embed and when I bring up on my computer, no art showing.
4
« Last post by Rockers on April 25, 2024, 08:04:58 PM »
Can someone share with me the best settings for saving pdf mocks in Illustrator? We run into some issues recently where art doesnt show on pdfs sometimes and I cannot figure it out even if I rasterize. Is it a CC issue or is it a settings issue?
Is your artwork contained by the artboard? If it is outside of the artboard it won`t show when saved as pdf. We save our mock-ups as .png files in Illustrator.
5
« Last post by TheGhost on April 25, 2024, 07:44:46 PM »
Can someone share with me the best settings for saving pdf mocks in Illustrator? We run into some issues recently where art doesnt show on pdfs sometimes and I cannot figure it out even if I rasterize. Is it a CC issue or is it a settings issue?
6
« Last post by ericheartsu on April 25, 2024, 01:21:14 PM »
We closed our factory in Houston, and have a bunch of leftover pieces from our Washout room.
Custom built filter tanks: $200ea
we have three of these. These are amazing and if maintained will filter your waster water EXCEPTIONALLY well.
Sgreen Filter sation - $100
paired with the above filter tanks, you will have water that you can drink.
55 gallon drum of Saati Direct Prep 3 - $100
This is a FREAKING STEAL. we do not want to ship this across country.
Oversized washout booth - $300
Looks like the back plastic was cracked in moving, and it's an easy solve. This booth is massive as it came out of an old sign shop.
7
« Last post by whitewater on April 25, 2024, 11:24:57 AM »
UPDATE: so it took me a week before I could get back there to take the control board apart to send out for a fix... since I had the back off I was going to turn on and jiggle some crap around..
Well I turned on, and wouldn't you know it freakin works. I didn't do anything.
I would assume it could be one of those things that will get worse over time, but as of now, we can use it.
8
« Last post by SPexchange on April 19, 2024, 10:56:42 AM »
M&R Gauntlet Automatic T-shirt Shop Sale - Skokie, ILStarting price $2000 ends April 22nd - Needs to go. https://www.auctiondiy.com/Event/Details/452634/MR-Automatic-Tshirt-Shop-Sale-Skokie-ILM&R Gauntlet with air compressor and chiller Brown Dryer Exposure Unit
9
« Last post by Atownsend on April 17, 2024, 04:08:02 PM »
Thanks Steve. I’ll see if I can save it as a PSD and see if it still does that. I’m just trying to wrap my theory brain around it at this point. The text in PS is pixel data, no fonts so I was pretty stunned to see the text effected. We’ll use both DCS2 and PSD with blank RGB channels, depending on what mood I’m in on a particular day. Is there any benefit to using a PSD over a DCS2? I like the DCS two because it usually looks a little bit better in AI with the color composite.
10
« Last post by Sbrem on April 17, 2024, 10:02:14 AM »
I was using .psd files instead of DCS 2.0 for the last 15 years or so. Maybe that will work for you. I can't think of a way that a letter would be dropped. In the .psd files, the text should be converted to raster, in Illy, the text would be converted to outlines. At least that was my experience.
Steve
|
Recent Posts