TSB
Embroidery => General Embroidery => Topic started by: Admiral on April 05, 2018, 03:09:59 PM
-
I believe this is hand stitched. Is there a way to replicate it with a machine though? I think 12 weight is the thickest thread we can put on our embroidery machines...this is probably thicker than that.
-
We do that here on our emb machines..... Thats not really my department so I'll have to check how its done but I know when we digitize we call it chain stitching
-
A true chain stitch is literally wrapping the thread around the needle in a chain. You can digitize in a faux chain stitch, but to get it to really sit on top you would either need a sequence attachment, which can get an effect like this https://www.superdry.com/womens/t-shirts/details/77269/stitch-snowy-t-shirt-light-grey (https://www.superdry.com/womens/t-shirts/details/77269/stitch-snowy-t-shirt-light-grey) or you need a chain stitch machine.
I attached an example of a faux chain stitch done on an embroidery machine, you basically make interlocking v's in the digitizing, and can use a thick thread, but it isn't a true chain stitch which is a single needle point with additional threads getting sewn down on top.
-
Or you could simply create it in a satin stitch if your customer will accept a flatter less rustic design.
mooseman
-
This is a faux chain stitch fill we did, but you can see the chain stitch look around the border.
Sewn with a thicker diameter thread.
-
Looking to simulate this with SP one day
-
Thanks guys. I think we may try going those interlocking v's with 12 weight thread and see if we like it.
-
Looking to simulate this with SP one day
Little V's with Puff ink would do the trick. You could easily make a vector pattern stroke to simulate the effect, and some Puff additive would make it stand up on the garment.
The trial and error part would be spacing the "stitches" far enough apart so that when it puffs up it doesn't fill in to much and just look like a solid bad quality print.
-
I don't know what program you are using to digitize but I am using Gunhold Wings
and after digitizing a running stitch I can select from the "style" menu "chain" and
it generates the V's as the "faux" chain without having to hand digitize all those
little V's. Set the stitch length and you can get what you are looking for.
-
Looking to simulate this with SP one day
Little V's with Puff ink would do the trick. You could easily make a vector pattern stroke to simulate the effect, and some Puff additive would make it stand up on the garment.
The trial and error part would be spacing the "stitches" far enough apart so that when it puffs up it doesn't fill in to much and just look like a solid bad quality print.
And theres the oft overlooked puff UB