TSB
Embroidery => General Embroidery => Topic started by: blue moon on April 09, 2022, 11:02:48 PM
-
Anybody using it? What do we need to know?
Have our first Embroidery machine coming in couple of weeks and am thinking it would make sense to streamline the process as much as possible.
Which version should we get?
Any thoughts would be much appreciated!
pierre
-
Anybody using it? What do we need to know?
Have our first Embroidery machine coming in couple of weeks and am thinking it would make sense to streamline the process as much as possible.
Which version should we get?
Any thoughts would be much appreciated!
pierre
get as much as you can. especially if doing your own digitizing. if ordering online get editable files for you.
Sent from my SM-G975U using Tapatalk
-
My experience: Go ahead and get Wilcom. Pulse is a good software for Tajima, if you ever leave Tajima, Wilcom is where you will probably land. Its probably the industry standard. I was tajima for years, but when we made the switch to Barudan, there was no looking back. Not bashing it, it is a great software (for Tajima). Just my opinion....don't shoot me!
-
My experience: Go ahead and get Wilcom. Pulse is a good software for Tajima, if you ever leave Tajima, Wilcom is where you will probably land. Its probably the industry standard. I was tajima for years, but when we made the switch to Barudan, there was no looking back. Not bashing it, it is a great software (for Tajima). Just my opinion....don't shoot me!
Does Wilcom offer networking and data analytics for Tajima?
Why did you switch to Barudan?
pj
-
We use Illustrator Extreme, good level to have most tools and be efficient in digitizing. I don't have experience or knowledge of the 2 more advanced levels but they are pricier so there is that!
We do network all machines (10 machines total) and barcode scan to pull in designs which works well.
-
Tajima machines run non standard networking protocol. While they have ethernet port, no direct connection is possible.
Pulse offers special rather pricey SW to network them. To me this is the worst thing with Tajima. For our 15 machines cost is about 20000€/$
To bypass this you can use Wilcom SW and their Connect device USB/ WiFi. To me better solution.
-
Tajima machines run non standard networking protocol. While they have ethernet port, no direct connection is possible.
Pulse offers special rather pricey SW to network them. To me this is the worst thing with Tajima. For our 15 machines cost is about 20000€/$
To bypass this you can use Wilcom SW and their Connect device USB/ WiFi. To me better solution.
Sounds like you are talking about their enterprise networking software, not what is standard on small/medium size businesses. LAN license is $200 per machine, it goes to the software dongle key to allow machine connection.
-
Tajima machines run non standard networking protocol. While they have ethernet port, no direct connection is possible.
Pulse offers special rather pricey SW to network them. To me this is the worst thing with Tajima. For our 15 machines cost is about 20000€/$
To bypass this you can use Wilcom SW and their Connect device USB/ WiFi. To me better solution.
Sounds like you are talking about their enterprise networking software, not what is standard on small/medium size businesses. LAN license is $200 per machine, it goes to the software dongle key to allow machine connection.
Our dealer never mentioned anything like this. So you connect one machine to PC running Pulse digitizing SW? Or several?
-
My experience: Go ahead and get Wilcom. Pulse is a good software for Tajima, if you ever leave Tajima, Wilcom is where you will probably land. Its probably the industry standard. I was tajima for years, but when we made the switch to Barudan, there was no looking back. Not bashing it, it is a great software (for Tajima). Just my opinion....don't shoot me!
Does Wilcom offer networking and data analytics for Tajima?
Why did you switch to Barudan?
pj
Wilcom does everything and more. I switched to Barudan for 1 reason....ITS BETTER. Does hats better, and sews small text better. Again, my OPINION!
-
Tajima machines run non standard networking protocol. While they have ethernet port, no direct connection is possible.
Pulse offers special rather pricey SW to network them. To me this is the worst thing with Tajima. For our 15 machines cost is about 20000€/$
To bypass this you can use Wilcom SW and their Connect device USB/ WiFi. To me better solution.
Sounds like you are talking about their enterprise networking software, not what is standard on small/medium size businesses. LAN license is $200 per machine, it goes to the software dongle key to allow machine connection.
Our dealer never mentioned anything like this. So you connect one machine to PC running Pulse digitizing SW? Or several?
Several - to the network, not directly to the machine with the Pulse software. The license is updated on the software dongle which allows the machine to connect to the Pulse software then.