TSB

General => General Discussion and ??? => Topic started by: Denis Kolar on December 26, 2013, 09:32:08 PM

Title: Santa came a few times in a last few days :)
Post by: Denis Kolar on December 26, 2013, 09:32:08 PM

Staring on Monday, then Tuesday and then the Fusion press today finalized the package today.

Ricoh 7100, Hotronix Fusion heat press, multi size Mug Heat press and a bunch of supplies.
Hopefully, a deal I have been working on will pay it off almost instantly.

Thank to Sweetts (Roger) for all your help and a bunch of those samples you brought me.

Sublimation, here I come.

Title: Re: Santa came a few times in a last few days :)
Post by: Denis Kolar on December 26, 2013, 09:32:48 PM

And the first print....

Title: Re: Santa came a few times in a last few days :)
Post by: Dottonedan on December 26, 2013, 09:36:35 PM

NICE.   I could use that sub mug thing.  If we make it long enough, we'll get one of those sub printers.

Title: Re: Santa came a few times in a last few days :)
Post by: sweetts on December 27, 2013, 07:54:23 AM

Santa was very nice to you I love the fusion press


Roger
RT screen designs
Www.rtscreendesigns. Com

Title: Re: Santa came a few times in a last few days :)
Post by: Audifox on December 27, 2013, 08:03:35 PM

We've had our fusion press a couple of years. There are a couple of things that you might want to do.
 make sure you have a surge protector of some sort. We had a brown out and it damaged the main board. Got it replaced on warranty($550.00 touch if you are paying for it) but before then it wouldn't save any new pre-sets.
 you might want to cover the rail that the plate rides on( has sharp corners near the front and things get snagged on it, also possibility of staining from grease on there) Have fun.

Title: Re: Santa came a few times in a last few days :)
Post by: Gilligan on December 28, 2013, 11:33:41 PM

Surge protectors don't do much and definitely won't help with brown outs.  If it can handle the amp draw a battery backup with voltage regulation would help.