TSB
General => Industry shows => Topic started by: Doug S on January 21, 2014, 05:59:00 PM
-
I know it's a ways off but me and my wife just registered for the May ISS show in Nashville. I am bound and determined not to let work get in the way of this one. It seems that everytime we plan a trip we always let something get in the way but not this time. I hope to meet some of you there.
-
We will be there for sure, can't wait!
-
We are kicking it around.
-
Is it a decent size show?
-
I plan to be there. I wanted to meet Johnny with Killergraphics he said he was going to be there.
-
Is it a decent size show?
Pretty sure this is their first go around in Nashville.
If the schedual at work here lines up right, I'll be there! Have a bunch of family in Tennessee and Kentucky I should stop out and see.
-
Its about 4hrs from me, so I could probably get away enough to go.
-
Is it a decent size show?
This is the first ISS show at a new convention facility located in Nashville.
Should be a good regional show with core education seminars and a great exhibitor selection.
One of the things I like about smaller regional shows is the amount of time exhibitors/vendors have to talk at depth when 18,000 other people [i]are not [/i] in the aisles.
Glass half full or half empty, you decide.
I will be there, see you at the show!
~Kitson
-
I'm tossing around the idea of going, may bring a screen printer friend with me
-
This might be a decent show for me to get to. Atlantic City would be great but not so much for someone with a "little bit of a gambling problem". If you put me near a casino with something else I should be doing, I likely won't ever make it to what I should be doing with any money left. I've been lucky enough to have been drug out of a casino several times while on top but most of the time it ends badly, with me feeling ashamed and with the same look that my dog has when you make eye contact with him while he's taking a crap.
-
Did someone say craps table????
-
This might be a decent show for me to get to. Atlantic City would be great but not so much for someone with a "little bit of a gambling problem". If you put me near a casino with something else I should be doing, I likely won't ever make it to what I should be doing with any money left. I've been lucky enough to have been drug out of a casino several times while on top but most of the time it ends badly, with me feeling ashamed and with the same look that my dog has when you make eye contact with him while he's taking a crap.
Same problem here, I've put off buying extra floodbars or squeegee holders but then turn around and lose the same amount of money I would've spent on equipment at the blackjack table.
-
I am really looking forward to the nashville show
Sent from my iPhone using Tapatalk
-
Hi, Everyone!
It's Erin from ISS.
We are very excited about the ISS Nashville show! The show will be at the new Music City Center. This is our first show in the Nashville area and we have received some fantastic feedback. Already we have M&R, SanMar, Workhorse Products, Next Level Apparel and Hirsch International signed up to exhibit with us.
Don't forget to register to attend the show at www.ISSshows.com (http://www.ISSshows.com)!
Have a fantastic weekend!
E
-
OK, I registered. Now it's a matter of getting my a$$ there. I hope I can make it
-
Dave, I am considering going and would love to meet up, but I need a hard commitment from you!
-
Someone who knows their way around Nashville will have to tell us of some place close by to meet up.
-
everything is right there. walk to everything. The new Omni Hotel is next door to the convention center. Most will probably stay there. See you there Dave, we can talk CH3D!
-
If I can't make ac I will be there
Sent from my iPad using Tapatalk
-
We will be doing Nashville for the first time this year. Can't wait to see those that didn't make it to AC. Of course, those that did make AC might still be welcome to swing by - we'll see though. I'll add the booth number when Sheri gets it to me.
-
M&R having a set up there?
-
yep, dark room too, I am told.
-
Whats the deal with this Nashville show, anyone?
There are like 12 exhibitors and 3 classes to take(yes I am exaggerating for dramatic effect). I thought this show was replacing the the one in Indy or somewhere, was that one this small as well? Either way I already have the tickets so I am going, but I have to say from the ISS website it looks to be a bit underwhelming. :(
Hope some of the local printers can swing things in the right way for the board members! Is there a meet up or dinner scheduled, or is someone willing to wear that hat?
-
Hi, TCT,
We're actually very excited of the response from our exhibitors and attendees about this show. We're hoping to reach a base from the upper Southeast (Georgia, Alabama, North Carolina, etc) and also the Midwest (Ohio, Illinois). It's actually the size of our Orlando show, which, for a launch, is a pretty good turnout! M&R, SanMar, Workhorse and Next Level have all committed to the show! Look forward to seeing you in a few weeks and I hope you enjoy the show!
Thanks!
Erin
-
TechSupport Screen printing Supplies will be there come see us at Booth #117
come see us for the best from Workhorse, Vastex, S.Roque, Rhino tech, BBC, Wilflex, Permaset water base inks, Ulano, Kiwo, Easiway, Serilor/Fimor, Franmar and many more.
-
Whats the deal with this Nashville show, anyone?
There are like 12 exhibitors and 3 classes to take(yes I am exaggerating for dramatic effect). I thought this show was replacing the the one in Indy or somewhere, was that one this small as well? Either way I already have the tickets so I am going, but I have to say from the ISS website it looks to be a bit underwhelming. :(
Hope some of the local printers can swing things in the right way for the board members! Is there a meet up or dinner scheduled, or is someone willing to wear that hat?
Alex,
Although some may say I bring a prejudiced view to this conversation I really like the smaller ISS regional shows when it comes to working the show floor.
The exhibitors have fewer people to talk with and I take advantage of that by being able to ask much more detailed questions than an exhibitor would have time to deal with at LB, AC or FW.
I've not heard about any meet & greet, but let me know and I'll be there.
Best,
~Kitson
-
Sorry after re reading my post I realized it came off quite negative. I am not always the most agreeable in the morning before my first Monster...
Guess I was just looking forward to a bigger event with more classes. I can never quite fit everything in at Long Beach!
We have a regional one up here (DAX Show) but it is a joke, I started worrying it was going to be like that. Since Nashville can be a great time, I had kinda been envisioning the "show buzz" of Long Beach coupled with some good ole' Nashville nightlife!
I know there are a handful of you on here from the general region, anyone willing to set up a dinner or something? I could have my cousin that lives in the area set something up, but a screen printer he is not. I also usually don't remember a solid 3 days when I visit the family and he plans things:D
-
...hey Rich/244...is M&R exhibiting in the NBM shows? Specifically Charlotte in November. Reason I ask is, if that show (which is a shorter drive for me) is a bust, then I may make a plane to attend Nashville. Thanks!
..and TSB'ers, we should definitely plan out a meetup. I say we make Brandt pay for dinner... ::)
vvvvvvvvvvvvvvv
(http://www.quickmeme.com/img/04/0434bf7e61b3a4cafd353f357cb79fff1d40cea2837116ba0278d23f55cad148.jpg)
-
Been too busy to make the previous iss shows this year but looks like I'll be able to make this one. Looking forward to seeing everyone if in fact we don't get hit with a last minute project too good to pass up lol.
-
Stop by Booth 112 at Nashville to see the Workhorse Sabre. We'll have an 8 color there with the "Roll In" Flashback. The "Roll In" Flashback can be moved to any head quickly and will adjust to flash in the "table up" or "table down" position with ease. Roll it in to head one and flash in the "Table Down" position to Print and Flash in the same head or roll it into head two and flash in the Table Up position to flash while the other print heads are printing. Since they "Roll In," you can have as many as you want and use them anywhere. Flashing in the Table Down position will maximize your capability and flashing in the Table Up position will speed things up. The Sabre also has a companion "Roll In" Quartz Flash to maximize it's production capability. The flash options make the Sabre the most versatile machine in it's class.
Workhorse will also have a new Wrangler in the Posse. Be sure to say hello!