TSB

screen printing => Equipment => Topic started by: Rockers on February 23, 2014, 06:38:40 PM

Title: M&R BLADESHAPER SC Squeegee Blade Sharpener
Post by: Rockers on February 23, 2014, 06:38:40 PM

Anyone using one of those?
http://www.mrprint.com/en/Textile%20Screen%20Printing%20Equipment/Squeegee%20Blade%20Sharpening%20Systems/Squeegee%20Blade%20Sharpeners/BLADESHAPER%20SC%20Squeegee%20Blade%20Sharpener/features (http://www.mrprint.com/en/Textile%20Screen%20Printing%20Equipment/Squeegee%20Blade%20Sharpening%20Systems/Squeegee%20Blade%20Sharpeners/BLADESHAPER%20SC%20Squeegee%20Blade%20Sharpener/features)

As we are going to order soon as Starlight 3140 and we are considering to add as well a M&R squeegee blade sharpener. I looked at other suppliers too but then we would have to fork out again on separate shipping charges etc.
I assume this one will do us just fine.

Title: Re: M&R BLADESHAPER SC Squeegee Blade Sharpener
Post by: dirkdiggler on February 23, 2014, 06:45:25 PM

I used to have one just like it, and it works great!

Title: Re: M&R BLADESHAPER SC Squeegee Blade Sharpener
Post by: abchung on February 24, 2014, 02:45:43 AM

I have the same one but branded as Serilor.
I think they are from the same company. Encore Engineering.

I like my one and would not go back to sand paper or dull squeegees.

Title: Re: M&R BLADESHAPER SC Squeegee Blade Sharpener
Post by: beanie357 on February 24, 2014, 05:48:24 AM

We have the serial or version.
Works well.
Keep sharp easier the make sharp.
Just got ours. Still on first round.
Lots of squeegees. More screwed up than was apparent to us. Of course, my guys like stone knives and bearskins.