TSB

screen printing => Newbie => Topic started by: Susu on March 08, 2014, 04:38:24 PM

Title: design.standard location guide
Post by: Susu on March 08, 2014, 04:38:24 PM

does anyone have a standard design location guide

Title: Re: design.standard location guide
Post by: Frog on March 08, 2014, 04:48:06 PM

I've shared this more than once.

In the end though, it's what pleases your particular clients (or my wife, LOL!)

Note that my numbers go from the opening, while many reference from the bottom of the collar

Title: Re: design.standard location guide
Post by: starchild on March 08, 2014, 05:28:55 PM

I always go from the bottom- That's how my pre reg board is designed..  So from opening is like a 1.5" difference from these numbers? Exactly where in the opening- center, bottom of back collar, top of front collar?

Sent using Tapatalk

Title: Re: design.standard location guide
Post by: Frog on March 08, 2014, 06:46:34 PM

Quote from: starchild on March 08, 2014, 05:28:55 PM

I always go from the bottom- That's how my pre reg board is designed..  So from opening is like a 1.5" difference from these numbers? Exactly where in the opening- center, bottom of back collar, top of front collar?

Sent using Tapatalk

My press boards look pretty similar to this attached pic.
My layout board has ruler measurements.

Title: Re: design.standard location guide
Post by: Frog on March 08, 2014, 09:03:13 PM

btw, recently, I had another shop do a run for me and their proof reflected measurements from the bottom of the collar (AA 2001 and Gildan 2000), but were almost the same position as my way.

Title: Re: design.standard location guide
Post by: whitewater on March 09, 2014, 09:23:10 AM

frog...i still have that paper up near the press for the printers to look at..LOL

Title: Re: design.standard location guide
Post by: Susu on March 09, 2014, 11:18:20 AM

Thank you for the information, it will be a big help.