TSB
screen printing => Newbie => Topic started by: Powerflex Printing on March 14, 2014, 01:10:32 PM
-
Hi Guys, First time ordering supplies, here is a list can you please confirm or comment on the product that I chose, I did research, but you know how that goes
Cleaners
CCI RC5 Screen Wash Solvent Ink Remover - Gallon
Emulsion cleaner - CCI ER 35 Emulsion Remover - Quart
Hand Cleaner - RyoGreen Hand Cleaner - Quart
Spray
Ryo Spray Adhesive Mist ORM-D - Can
CCI Web Type Spray Adhesive - Can
Ryonet® WBP Hybrid Emulsion by CCI for Water-Based and Plastisol - Quart
Ink
This is what ill be using on my Cotton shirts
White Cotton - Cotton Green Galaxy Comet White Ink - Quart
R2O Water Based Black Ink - Quart
This will be used on my Polyester
White 50/50 - IC 7100 Low Cure - quart
Black 50/50 - IC 7100 POLY INK - Pint
I needed squeegees so I wanted to order 6" and 12" of the 70
all this is over $300.00 from ScreenPrinting.com
if you have other locations or ANYYYYThing, I would love to hear from you
Many Thanks
Chuck
Powerflex Printinng - Powerflex Gym
Family Owned/Operated
-
-Hand cleaner + Home Depot
-Ink not sure haven't used this brand is pretty new so there won't be a lot of help if you run into problems and want to post ? on forum
-emulsion not sure haven't used
-squeeges 6" ok but 12" may be too small with most people wanting designs around 11-12" wide , maybe go with 14"
-
http://store.techsupportsps.com/products/tb-hv (http://store.techsupportsps.com/products/tb-hv)
Get that instead of spray adhesives. Your lungs and your press will thank you. Use web adhesive only for hoodies.
-
Other places I used:
http://store.techsupportsps.com/ (http://store.techsupportsps.com/)
http://www.valleylitho.com/acatalog/screen.html (http://www.valleylitho.com/acatalog/screen.html)
http://superiorsps.com/ (http://superiorsps.com/) Same as Valley Litho
http://onesourcemichigan.com/ (http://onesourcemichigan.com/)
It all depends where you live. Shipping will be a killer.
-
I have nothing against Ryonet, but you can probably get a better recommendations from a local supplier. Also, they might deliver on a route or you might be able to pick it up.
-
Xenon is a good choice. 8) :o :o 8) ??? ???
-
If $300 seems like a lot of money, keep in mind that it isn't. Also, you will/should make money with your materials, so that $300 won't seem like much after awhile. I can't remember the last time something only cost $300...
Steve
-
Welcome Powerflex,
I don't know about anyone else, but this post also piques my interest about another piece of the puzzle.
You sound ready to slap some ink on a shirt or two. Whatcha' going to use to help you do that?
What equipment do you have?
-
I echo what DK said about spray adhesives. Get a water based one.