TSB
General => Introduction => Topic started by: DanK on August 11, 2011, 08:10:47 PM
-
Just joined. I have been participating in T Shirt Forums for a few years, and Jamie from Ink Brigade suggested I join here, so here goes. I am a screen printer from Oakland, California, my shop is called Forward Printing. www.forwardprinting.com (http://www.forwardprinting.com) My email is danh@forwardprinting.com.
I look forward to participating and learning!
-
Welcome!
Do not get scared right away, only few of us bite :)
-
Hey Dan,
absolutely AWESOME to see you here! When I was getting my MHM about two years ago I talked to you or your partner and received a lot of useful advice (and I did buy couple of the books you guys suggested!).
I have been racking my brain about your circular forward printing logo with 3D ink and foil on top of it and can not for life of me figure out how you did that!!! How do you get the foil on top of 3D print, but also all the way on the sides too?
And just so you know, we have been behaving here and have not been clicking on your google ads!!!
pierre
-
Hey Dan, as you may or may not know, I'm an East Bay boy (or more accurately near geezer) as well.
-
Hey folks!
Dennis, thanks for the warning! Hopefully I offer no reason to bite!
Pierre, that was funny dude, thanks for not clicking, I'll try not to reveal the secrets of what we actually pay for though!!! When I was registering one of our ads was up. It looks like the forum may make automatically put one of our image ads in my sig as well? What's the name of your shop? You very well could have talked to me, or my partner who is also named Dan, Dan Corcoran. The circular logo was a bear dude. I think that thing was on the press alone for like 3-4 revolutions too... It's clear gloss gel, high density, printed with a different color of foil haphazardly applied between each layer of HD gel ink. We'd send it around the press, print, flash, foil, print, flash foil, etc. Each time it got back to station 1 we'd stop the press and go around and adjust the off contact on each active print head, and eventually that's what we ended up with...
Frog. What's your shop? Have we talked under some other name than Frog?
Thanks for the responses...
-
Nope, we have never taolked unless you called for prices, lol!
since 1988, I've run a small shop from my residential property in Walnut Creek mostly catering to the locals, but now with the interweb thing, attracting the PITA jobs that guys like you turn down from all over the Bay Area. ;D
-
Nope, we have never taolked unless you called for prices, lol!
since 1988, I've run a small shop from my residential property in Walnut Creek mostly catering to the locals, but now with the interweb thing, attracting the PITA jobs that guys like you turn down from all over the Bay Area. ;D
Two things.
I have a referral list email signature that I use when I get under minimum requests. Do you want to be on it? If so, email me your info to danh@forwardprinting.com. Right now I have another shop in Walnut Creek and a shop in Sacramento on it, one local DTG printer, and one local embroiderer. The two shops on the referral list are manual shops.
I work out of an office in Pleasant Hill these days. When we started, before we moved to Oakland, our shop was in my garage (at a different house) in Pleasant Hill.
-
Hey Dan,
absolutely AWESOME to see you here! When I was getting my MHM about two years ago I talked to you or your partner and received a lot of useful advice (and I did buy couple of the books you guys suggested!).
I have been racking my brain about your circular forward printing logo with 3D ink and foil on top of it and can not for life of me figure out how you did that!!! How do you get the foil on top of 3D print, but also all the way on the sides too?
And just so you know, we have been behaving here and have not been clicking on your google ads!!!
pierre
Hey Pierre, was that your Hellfire shirt that was up on the Impressions Awards email blast today? If so, good work in short time!!!
-
Hey Dan,
absolutely AWESOME to see you here! When I was getting my MHM about two years ago I talked to you or your partner and received a lot of useful advice (and I did buy couple of the books you guys suggested!).
I have been racking my brain about your circular forward printing logo with 3D ink and foil on top of it and can not for life of me figure out how you did that!!! How do you get the foil on top of 3D print, but also all the way on the sides too?
And just so you know, we have been behaving here and have not been clicking on your google ads!!!
pierre
Hey Pierre, was that your Hellfire shirt that was up on the Impressions Awards email blast today? If so, good work in short time!!!
Yup, our shirt (Dot Tone Dan and me. He never really got the credit he deserved. He took care of the art part which was a lot of work. We turned the print on it's head a couple of times before getting it right. Some of the colors had to be changed and it was a lot of work to do it. Dan re-separated it three times before it was right.). What did the email blast say?
pierre
-
I have a referral list email signature that I use when I get under minimum requests. Do you want to be on it? If so, email me your info to danh@forwardprinting.com. Right now I have another shop in Walnut Creek and a shop in Sacramento on it, one local DTG printer, and one local embroiderer. The two shops on the referral list are manual shops.
Thanks.
I'll talk to you some time about referrals. Much of the time, I have all the work I need or want, and I do like to keep it local when possible.
You know the drill. When I'm slow, I could use the new work, the rest of the time, leave me alone! I'm getting too old for this pressure! :'(
-
Pierre, I can't figure out how I linked through to it, I thought it was from an email blast, but I could be wrong, but here's the awards gallery page:
http://www.impressionsmag.com/impressions/about-us/Awards-and-Design-Gall-1208.shtml (http://www.impressionsmag.com/impressions/about-us/Awards-and-Design-Gall-1208.shtml)
Frog, yeah, hit me up, it's cool to have local contacts, and I don't have any idea who you are!
-
Frog, yeah, hit me up, it's cool to have local contacts, and I don't have any idea who you are!
Well, unless you needed shirts and/or looked in the Yellow pages for twenty or so years or did an online search for the last five years, you'd have no reason to have ever heard of me.
-
Welcome new dude!! I went on t-shirt forums a few times & didn't care for it too much. Its too big of a forum for me. Personally, I like it here and think you will too. It's alot of fun and everyone's a big help!
-
Woo Hoo! Welcome Dan. Sean here. Mildly surprised you and Andy haven't crossed
paths yet, he's literally around the corner from Carlos. When I send someone his way
I tell them to say "Sean sent me" so he knows exactly who to berate later.
Lot's to learn here and not so much to wade through.
-
Woo Hoo! Welcome Dan. Sean here. Mildly surprised you and Andy haven't crossed
paths yet, he's literally around the corner from Carlos. When I send someone his way
I tell them to say "Sean sent me" so he knows exactly who to berate later.
Hey Sean! Thanks for the warm welcome man. Yeah, this is the first I know of Frog!!!
-
Hey Dan,
absolutely AWESOME to see you here! When I was getting my MHM about two years ago I talked to you or your partner and received a lot of useful advice (and I did buy couple of the books you guys suggested!).
I have been racking my brain about your circular forward printing logo with 3D ink and foil on top of it and can not for life of me figure out how you did that!!! How do you get the foil on top of 3D print, but also all the way on the sides too?
And just so you know, we have been behaving here and have not been clicking on your google ads!!!
Pierre......there are two ways to do the 3D foil. One is a bit easier than the other and each yield slightly different results. I'm leaving early today but maybe next week I'll post on that.
Cheers tp
pierre
-
this place just became EPIC. . . welcome.
-
Dan! I'm so glad you made it! Welcome ;D
-
Hey Dan and Dan,
Brando here up in Seattle! Ill be down in the Bay Area next month for a wedding, baby due date, and other family/friend shindigs. I still owe you guys dinner and beers. Ill give you a ring. Glad to see you here!
-
Homer, thanks man. Your signature is awesome!
Jamie, thank you for the invite!
Brandon. Nice to see you on here too man!!! Yes, when you come down, lets definitely hook up! You don't owe us anything...