TSB

screen printing => General Screen Printing => Topic started by: jason-23 on May 05, 2014, 04:39:34 PM

Title: How would you print this?
Post by: jason-23 on May 05, 2014, 04:39:34 PM

Customer wants this on kelly green.....

Title: Re: How would you print this?
Post by: Sbrem on May 05, 2014, 05:36:26 PM

Of course, on Kelly, why not? I would change the green to white (or some neutral light color, gray, beige) and use 2 blacks, one for the silhouettes, and the second
for the rest... float that by them and see if they bite...


Steve

Title: Re: How would you print this?
Post by: mimosatexas on May 05, 2014, 06:03:55 PM

the off centered elements and stretched out stuff makes me cry :(  I second changing green to white, and either using black for the silhouettes.  I might do a dark or light green for the other elements though, for a more tone on tone look.

Title: Re: How would you print this?
Post by: jason-23 on May 05, 2014, 06:44:15 PM

Yeah I know it sucks, I didn't do the design. Thanks for the ideas, I will run it by them.

Title: Re: How would you print this?
Post by: Dottonedan on May 05, 2014, 07:59:01 PM

I would challenge myself and knock that small serrifed type out of the base white on a 110 mesh.  LOL.
Just kidding there. Don't do it!  LOL.


Ditto what they said.

Title: Re: How would you print this?
Post by: jvanick on May 05, 2014, 08:17:32 PM

clear base for the green parts?  go for a true tone-on-tone?