TSB

screen printing => Equipment => Topic started by: DCSP John on June 03, 2014, 02:22:59 PM

Title: Alarm Code 3 on Radicure Dryer
Post by: DCSP John on June 03, 2014, 02:22:59 PM

Hello All..

Figured I would post this while waiting for a call back from M&R.
We lost power in our building, and now our dryer is showing a ALM 3 error message.
Radicure, 3 PH.

Any one know what the fix might be?

John

Title: Re: Alarm Code 3 on Radicure Dryer
Post by: 244 on June 03, 2014, 02:35:54 PM

Quote from: DCSP John on June 03, 2014, 02:22:59 PM

Hello All..

Figured I would post this while waiting for a call back from M&R.
We lost power in our building, and now our dryer is showing a ALM 3 error message.
Radicure, 3 PH.

Any one know what the fix might be?

John

that is the motor alarm. You probably need to reset the overload on contactor one or two. That could happen if you lost power.

Title: Re: Alarm Code 3 on Radicure Dryer
Post by: DCSP John on June 03, 2014, 03:39:56 PM

...

Title: Re: Alarm Code 3 on Radicure Dryer
Post by: DCSP John on June 03, 2014, 08:20:34 PM

Rich...  Thank you for your active interest in getting me back on line. M&R parts and service were first rate.
Hector, Nicky and Anthony - steaks and bourbon on DC Shirt & Print anytime you are in DC.
244 - you too, Buddy.. Porterhouse or New York Strip?

Sincerely,

John @ DC Shirt & Print..

Title: Re: Alarm Code 3 on Radicure Dryer
Post by: 244 on June 04, 2014, 07:05:25 AM

Quote from: DCSP John on June 03, 2014, 08:20:34 PM

Rich...  Thank you for your active interest in getting me back on line. M&R parts and service were first rate.
Hector, Nicky and Anthony - steaks and bourbon on DC Shirt & Print anytime you are in DC.
244 - you too, Buddy.. Porterhouse or New York Strip?

Sincerely,

John @ DC Shirt & Print..

Glad we could get you back up!