TSB

screen printing => Waterbase and Discharge => Topic started by: ZooCity on July 01, 2014, 01:15:53 PM

Title: Water based on press screen opener.
Post by: ZooCity on July 01, 2014, 01:15:53 PM

What's everybody like? We need this primarily for HSA inks during setup.  Also nice as a finishing move for DC or WB color changes and peace of mind when wiping out to take a break.  This is much more gentle stuff than plasti screen opener but more aggressive than water. We use water mostly for this.

The fast 32 from spray way has been OK but I'd prefer non aerosol.

Sent from my XT907 using Tapatalk

Title: Re: Water based on press screen opener.
Post by: jvanick on July 01, 2014, 01:28:18 PM

I've heard that windex works...

we use aerosol foaming window cleaner from sams club...

Title: Re: Water based on press screen opener.
Post by: tonypep on July 01, 2014, 01:31:36 PM

Water w/ windex

Title: Re: Water based on press screen opener.
Post by: Frog on July 01, 2014, 01:32:45 PM

Quote from: tonypep on July 01, 2014, 01:31:36 PM

Water w/ windex

The same as I have in a spray bottle to rejuvenate stick-um.

Title: Re: Water based on press screen opener.
Post by: ZooCity on July 01, 2014, 02:26:45 PM

Awesome I'll try the Windex water solution out or maybe try the glass cleaner we use for the expo glass. I'm pretty sure the spray with the foaming is actually just like relabeled carpet or window cleaner or something it looks and smells the same.

Sent from my XT907 using Tapatalk

Title: Re: Water based on press screen opener.
Post by: Frog on July 01, 2014, 02:31:21 PM

The small bit of ammonia may be helping in both applications

Title: Re: Water based on press screen opener.
Post by: TCT on July 01, 2014, 09:10:41 PM

We have used the Fast 32, but like already had been said, watered down windex does the trick.