TSB

screen printing => General Screen Printing => Topic started by: Donnie on August 22, 2014, 12:59:44 PM

Title: Print size for
Post by: Donnie on August 22, 2014, 12:59:44 PM

Doing some shorts. Printing on the leg of shorts.... As a general rule, for adult shorts what would be a standard print size?

Title: Re: Print size for
Post by: Doug B on August 22, 2014, 01:05:29 PM

  To me, about the same as left chest. Maybe a little bigger if they are a huge
athletic type short.

Title: Re: Print size for
Post by: papinc on August 22, 2014, 01:05:45 PM

I would say for the majority of what I've done... 3 1/2" - 4" wide...

Height dependent on image...

Hope this helps ;)

Title: Re: Print size for
Post by: Frog on August 22, 2014, 01:25:34 PM

In the end, as always, it's what the custy wants. Never hurts to run it by them.

Title: Re: Print size for
Post by: Screened Gear on August 22, 2014, 01:47:52 PM

Quote from: Frog on August 22, 2014, 01:25:34 PM

In the end, as always, it's what the custy wants. Never hurts to run it by them.

This is what I do. I also send a mockup proof of it so that you have some thing to fall back on if they have an issue.