TSB
screen printing => Screen Making => Topic started by: dirkdiggler on August 28, 2014, 04:02:55 PM
-
I couldn't find that much info about them here, but does anyone currently use them or have tried them recently? I here good things. Got 2 coming to test.
-
I have some 20x24 frames, used them a bit, never really liked them.. didn't seem to be any kind of huge difference over my statics.
I have a few panels, the stretcher tool for 20x24, and 3 frames, if somebody's interested, hit me up.
-
my shop is 90% panel frames....
good and bad...go with statics instead.
-
Ditto, but I can say that at least when they went to the Sefar panels, they worked. The originals were funky and required much tweaking (double rolling a side sometimes, an end sometimes). Originally no consistency on sizing, the one thing that a panel like this really needs!
You may want to find my recent post and ensuing thread about the similar product from Dynamic. The frames seemed nicer, and then also, Shurloc has a similar product that seems a step up.
I'll try to find it.
-
Andy is talking about these:
Alot cheaper than Sefar and Shurloc but IMO no better than a regular static frame.
http://www.wholesaleprintsupplies.com/ (http://www.wholesaleprintsupplies.com/)
-
Here's the thread http://www.theshirtboard.com/index.php/topic,12362.msg119658.html#msg119658 (http://www.theshirtboard.com/index.php/topic,12362.msg119658.html#msg119658)
-
Now if they started offering s-mesh panels than you might have something to look at.
-
Now if they started offering s-mesh panels than you might have something to look at.
or if you were awesome like me and made your own... ;D
-
No one is awesome like Homie!