TSB

screen printing => General Screen Printing => Topic started by: rmonks on December 12, 2014, 02:25:21 PM

Title: Printing over / across hoodie Pockets
Post by: rmonks on December 12, 2014, 02:25:21 PM

I have a job in the works that could possibly result in printing on and across the pocket of hoodies, I have never intentionally printed across the pocket, but was wonder if anyone has any tips on doing so, I can see possible issues with the area where the pocket is sewn on to the Hoodie. I just recently purchased the roller squeegee from Action, and was thinking of incorporating that into the mix.

Title: Re: Printing over / across hoodie Pockets
Post by: ebscreen on December 12, 2014, 02:28:40 PM

Foam on pallet and light spray tac in the pocket.

Title: Re: Printing over / across hoodie Pockets
Post by: jsheridan on December 12, 2014, 04:45:40 PM

we do it all the time here up to 12 colors.
We also use the roller, same as normal.

print like normal with a small shot of tac in the pockets.

Don't expect reg to be perfect, as it can and will move a little bit. Just add a disclaimer so the custy understands.