TSB
screen printing => Equipment => Topic started by: Itsa Little CrOoked on January 02, 2015, 03:04:52 PM
-
I've never been around automatics during setup and break down.
Anybody got a helpful video, or otherwise tips?
I've developed my own system that doesn't work too good with my Gauntlet.
I've gradually replaced all my manual squeegees with Ergo Force handles and they are effortless to tape up. Cleanup is pretty easy.
I'll get this auto press business...but I sure could use some advice right now.
Thanks!
Stan
(Edited for clarification: Ergo Force handles are for my manual.)
-
I've never been around automatics during setup and break down.
Anybody got a helpful video, or other tips?
I've developed my own system that doesn't work too good with my Gauntlet.
I've gradually replaced all my squeegees with Ergo Force handles and they are effortless to tape up. Cleanup is pretty easy.
I'll get this...but I sure could use some advice.
Thanks!
Stan
What is an Ergo force handle for the Gauntlet? Got a photo?
-
Sorry Rich, I sure wasn't clear the first time around. I tried to fix it.
When we started we had a bunch of wooden manual squeegees. I've gradually replaced all those with Ergo Force aluminum extrusions. I love them and a lot of the reason is because I use 3" tape on them to speed up cleaning. There aren't any bumps to tape over. I'll likely keep doing that for manual printing.
I can't see taping auto squeegees and winged floodbars working though.
Stan
P.S. I've had the occasion to call tech support a couple of times already. WOW. Why don't you teach some classes on how to set up a 21st century business!?! You've set the bar about as high for a business model as any outfit I've dealt with.
-
Get or make some press carts, 3 per machine works best to hold all of your screens, inks, tools and whatnot. Wheel it around the press and remove everything and put on the cart.
Wheel that cart to the prep area where someone else empties it, cleans everything and puts it all away, then rebuilds the next cart all the while you've been at the press setting up the next job cart that was in waiting in prep and are by now ready to run or are already running as the cleaner comes over and off loads for you.
one man show.. hire someone to do your dirty work.
-
one man show.. hire someone to do your dirty work.
Reminds me of when I first started running the Gauntlet up in Daytona 3 years ago. A friend called and asked me if I had any flunkies working under me. I said "Nope, I'm the flunkie."
As for Stan, if he's working alone, get a Safety-Kleen sink to clean up your squeegies and floodbars anyway.
-
Oh yeah. I'm a one man show in the screenprinting end.
I've got some part timers during our busiest season, but it's changing.
I've just now been reading about Ozzyjuice. Tom, would Safety Kleen be a better choice?
I'm spoiled with clean squeegees and stuff. My filthy press is about to drive me nuts. It's slowly improving, but wow!
-
Or do like we do...
we have 'extra' sets of squeegee/floodbars for our most common needs:
base white
top white
black
the rest are whatever major colors we're working on at the moment..
we're getting a smartwasher soon, but for now, we just use a bit of beaniedoo in the washout sink to clean the squeegee/floodbars after a custom color.
if a standard color, like a red or blue going to a different shade, we just card off the squeegee, wipe it decently well with a junk shirt, and throw it in and go.
Also, after looking into partswashers for the last month or so, I'd personally go Ozzywash/Smartwasher over Safety Kleen...
-
Oh yeah. I'm a one man show in the screenprinting end.
I've got some part timers during our busiest season, but it's changing.
I've just now been reading about Ozzyjuice. Tom, would Safety Kleen be a better choice?
I'm spoiled with clean squeegees and stuff. My filthy press is about to drive me nuts. It's slowly improving, but wow!
Well, I don't know nuthin' about any Ozzyjuice. Where I work in Daytona things are pretty much established. I started there seasonally as a sub-contractor, so I work with what's provided.
They are sticklers for cleanliness, and at my place I do keep my screens, press and squeegies pretty damn clean. Regrettably, I'm a bit of a slob about everything else.
The Safety-Kleen sink works pretty well, though. Seems like auto squeegies, floodbars, and screens are more time-consuming to clean that those I use in my own place on a manual.
-
We have a parts washer from Tractor Supply... we hot rodded it a bit with an oil filter relocation kit and that helps keep the solution clean.
I could easily drop in a heater mod and then add some ozzy juice to convert it over with much less expense.
I'll likely change a few things on this setup but overall it works really well.
-
We have a parts washer from Tractor Supply... we hot rodded it a bit with an oil filter relocation kit and that helps keep the solution clean.
I could easily drop in a heater mod and then add some ozzy juice to convert it over with much less expense.
I'll likely change a few things on this setup but overall it works really well.
what are you doing with your cleaning fluids? (oh wait, you said you were using something water/enzyme based right??
as far as the Ozzy juice goes, the reading I've done is that it's a combination of the fluid AND the filter mats that do the magic. Apparently the mat that goes in there is what activates and grows the microbes that break the stuff down, so unless you take care of that part of it, you might have troubles.
-
We have a parts washer from Tractor Supply... we hot rodded it a bit with an oil filter relocation kit and that helps keep the solution clean.
I could easily drop in a heater mod and then add some ozzy juice to convert it over with much less expense.
I'll likely change a few things on this setup but overall it works really well.
what are you doing with your cleaning fluids? (oh wait, you said you were using something water/enzyme based right??
as far as the Ozzy juice goes, the reading I've done is that it's a combination of the fluid AND the filter mats that do the magic. Apparently the mat that goes in there is what activates and grows the microbes that break the stuff down, so unless you take care of that part of it, you might have troubles.
No the enzyme stuff is just our degreaser, never tried it for ink degradiant.
Our chemical is filtered through the oil filter, so every now and then we have to change that out. We just top off fluid when we need to.
I haven't looked really hard at the smart system but my understanding is the chemical has the enzyme (magic) in it and that it requires heat to be "alive" and useful. I've always assumed the mat was just a filter for solids. This thing is designed to be a parts washer in like mechanic's shops and stuff... so collecting solids is probably more important to them.
-
From the Ozzy site:
"The OzzyMat is designed to introduce our microbes (Ozzys) into the SmartWasher system, a patented process, and to help reduce excess clogging during its’ 30 days, or (1) months use. It must be changed monthly which will keep the microbe (Ozzy®) colony healthy and keep your SmartWasher system working at peak performance. Failure to change the OzzyMat monthly will reduce the efficiency, health and bioremediation capabilities of the microbes (Ozzys). This will result in the OzzyJuice® becoming more and more contaminated until the system no longer cleans."
-
Ah... if that is really the case and not marketing pheuy... I'm pretty sure you can add the mat to my setup as well.
The video I saw it was just a mat used as a first layer collection. One of the redesigns I'm thinking about is to use the drain from the bottom and relocate the pump below it, so I can filter BEFORE the pump. Doesn't make MUCH difference with the way we use it (no solids) but I imagine the cleaner the pump the better.
-
Ah... if that is really the case and not marketing pheuy... I'm pretty sure you can add the mat to my setup as well.
The video I saw it was just a mat used as a first layer collection. One of the redesigns I'm thinking about is to use the drain from the bottom and relocate the pump below it, so I can filter BEFORE the pump. Doesn't make MUCH difference with the way we use it (no solids) but I imagine the cleaner the pump the better.
The system works great the way it's designed and performs better than advertised. Don't really see the need to change anything. Ours is over 8 months old and we have no sludge and have changed the pad filter twice.
-
Are you cleaning just squeegees and floodbars or are you cleaning screens also.
-
Are you cleaning just squeegees and floodbars or are you cleaning screens also.
We only use it for squeegees and flood bars. We use the Eco Tex for the screens.
-
Like Rich said, we have had ours for a long time and changed pads only a few times, maybe added a gallon or so in that time span. The other neat thing that we did was put a piece of squeegee rubber in the tank with half of it in the solution and half out. There have been no signs that the oozy juice has harmed the squeegee at all. They will be in our booth at the Long Beach show with one of their smart washers.
-
Im still wondering if anyone uses this for screens.
-
Rich and Patfinn, which chemistry do you use? I see some have tried the SW-7 and some the SW-1.
I happened to read a complaint on an Agribusiness forum that a farmer had his sit unused for a while it got pretty nasty. No other info was detailed. It may well have been idle for weeks on end, and there is no way to track that info down easily. Surely a long weekend now and then would be okay.
-
Rich and Patfinn, which chemistry do you use? I see some have tried the SW-7 and some the SW-1.
I happened to read a complaint on an Agribusiness forum that a farmer had his sit unused for a while it got pretty nasty. No other info was detailed. It may well have been idle for weeks on end, and there is no way to track that info down easily. Surely a long weekend now and then would be okay.
As per the manufacturer we use SW-1. It seems to be perfect for what we are doing and we leave it for some time during uses with no issue. We never even turn off the heater in the tank and it's fine.
-
Ah... if that is really the case and not marketing pheuy... I'm pretty sure you can add the mat to my setup as well.
The video I saw it was just a mat used as a first layer collection. One of the redesigns I'm thinking about is to use the drain from the bottom and relocate the pump below it, so I can filter BEFORE the pump. Doesn't make MUCH difference with the way we use it (no solids) but I imagine the cleaner the pump the better.
The system works great the way it's designed and performs better than advertised. Don't really see the need to change anything. Ours is over 8 months old and we have no sludge and have changed the pad filter twice.
All of my discussion is based on a DIY tank setup vs their very expensive parts washer.
The chemistry is more of what I am interested in, not the mechanics as there isn't much to that.
-
Ah... if that is really the case and not marketing pheuy... I'm pretty sure you can add the mat to my setup as well.
The video I saw it was just a mat used as a first layer collection. One of the redesigns I'm thinking about is to use the drain from the bottom and relocate the pump below it, so I can filter BEFORE the pump. Doesn't make MUCH difference with the way we use it (no solids) but I imagine the cleaner the pump the better.
The system works great the way it's designed and performs better than advertised. Don't really see the need to change anything. Ours is over 8 months old and we have no sludge and have changed the pad filter twice.
All of my discussion is based on a DIY tank setup vs their very expensive parts washer.
The chemistry is more of what I am interested in, not the mechanics as there isn't much to that.
the chemical does not work at all unless heated to the proper temperature and must go through the supplied filters that activate the microbes. Just a FYI.
-
Heat is heat... getting it to the right temp certainly won't take 2k of hardware.
-
Heat is heat... getting it to the right temp certainly won't take 2k of hardware.
Guess you are right. Go for it.
-
Thanks for all the replies!
And @ Islandtees, I'm guessing the answer to your question is no. Or at least no one that does screens in their Ozzy setup has seen this thread yet.
But based on Rich's enthusiasm (also Brad's early positive review on another thread) I'm going to head that direction too, eventually. I just haven't needed such a thing, with my manual setup. Autos are a little different. All part of the learning curve, I guess.