TSB

screen printing => Equipment => Topic started by: AntonySharples on March 10, 2015, 02:40:21 PM

Title: Compressor Help
Post by: AntonySharples on March 10, 2015, 02:40:21 PM

I am getting ready to have my sRoque installed Thursday and wiring up the compressor.  Having an issue with the pressure switch.  The pressure switch has wires hooked up now, one labeled motor, one labeled line.  Those are run via flex to the motor wiring box, and then out the main flex conduit holding the 3 main power legs.  I'm not understanding where these are supposed to be hooked to.  I tried following a diagram online that had them running to L1, L2, but that trips the breaker out.  Anybody have anything for me?

Thanks,
Antony

Title: Re: Compressor Help
Post by: jsheridan on March 11, 2015, 12:26:20 AM

Advice.. Hire an electrician.

power and taxes are when i call the pros.

Title: Re: Compressor Help
Post by: Binkspot on March 11, 2015, 07:00:32 AM

One goes to hot other magnetic coil on the contactor.

Better yet get an electrican.

Title: Re: Compressor Help
Post by: GKitson on March 11, 2015, 07:23:29 AM

Totally agree, some things are not worth messing with.

Sheridan is correct, the IRS and anything over 110 V deserves a pro.

~Kitson

Title: Re: Compressor Help
Post by: PylonPress on March 12, 2015, 11:23:20 PM

Also just curious, are you running your air through a chiller/dryer?